Fly sl600 master code

[FZA]

Trying to unlock this phone but having problems.It connects but gives me error.I have two but both giving me same problem.Please help

19200 autodetect
error: boot phase #2/1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom/ffs serious damaged, use repair eeprom/ffs files or use other unlock/format method
error: operation failed !
Finished, time used: 51 sec
Remove/Install battery now !

thanx

[rana_]

follow step...1. make "format ffs"
2. restore original imei
3. spunlock-read code

[FZA]

I tried But get same message for format ffs

[InfinityHelp]

hello!

you using wrong pinout or assembled cable wrong

[FZA]

I am using fly mx200 cable.Could you please give me the settings for this phone meaning boot baud rate,RTS/DTS line on/off

[InfinitySupport]

Hello,

Just use software default settings.
What to do now:
Try to read full flash from phone.
If phone can not be connected it's for sure cable problem and you need to double check pinout/cable.
MX200 cable is Ok for MX600, but you can try to swap RX <-> TX wires.