cdma w200 flash done with infinity

[kalpeshoza]

COM7 [VCP0] selected
Device: Motorola-W200
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
Connect Done
Initialize...
detecting chip[01]...
flash: 8988C400010001:8988C400000000
flash: Intel I28F320C3B-T T 4Mb
Initialize Done
Set baud...
slowest
Set baud Done
Check parameters...
flash: 8988C400010001:8988C400000000
reading [Motorola-W200_eeprom]...
file saved: C:\Program Files\InfinityBox\QCModule\Motorola-W200_eeprom_20090205-122014.B2E.bin
software version: 2.2.07.
flex version: FFN_A66_0111_036
LP version: LPH_A66_ASIA2_016
hardware version: MOTOROLA_A66
ESN: 34C7F9DA
Check parameters Done
Check flash...
Check flash Done
Write...
Area: Firmware
flash: 8988C400010001:8988C400000000
Write: Firmware
"safe mode" active
Area: Flex/Customization
flash: 8988C400010001:8988C400000000
Write: Flex/Customization
Area: Language pack
flash: 8988C400010001:8988C400000000
Write: Language pack
Write Done
Finished, time used: 418 sec
Remove/Install battery now !

[kalpeshoza]

for unlock use this file for flash in tata w200 cdma :)


1. w200_Main_HGM[1].2.0.15.B2M
2. w200_LPH_A66_ASIA9_008_En_Vn.B2P
3. w200_Flex_FFN_A66_1011_022_ChinaUnicom.B2F

[zeel_zeel]

Good test report... 100+ handsets unlocked with these files... Thanks to Infinity >>>

[Chandreshswami]

for unlock just flash with flex file only
w200_Flex_FFN_A66_1011_022_ChinaUnicom.B2F