Testpoint in Siemens C55? [Archive]

Juanperez

01-01-2003, 16:04

Hi!
There is a testpoint in Siemens C55?
Where? (photo, please)

Greetings and...

Happy New Year!

claudio_gsm

01-02-2003, 12:34

Testpoint or a cable with autoignition in c55 ...???
plzzz anyone put here ... a scheme with that cable
( autoignition ) or testpoint in c55 .

Happy New Year! to all !!!

Neo777

01-02-2003, 17:00

I see it a software .. around 500 $ .. who tell "You can unlock A50 with cable .. but C55 must open .. "

:(
Any Ideea !?

:eek: :eek: :confused:

ESKORT

01-03-2003, 12:58

See this
http://www.gsm-multifund.com/Anleitungen/a50unlock/a50unlock.htm

Neo777

01-05-2003, 12:21

but for C-55 ??
:confused: :eek: :confused: :eek:

DaysGSM

01-07-2003, 18:31

Hello all,
In C55 toi have access to test point , u must remove
one protection , its litlle bit dangerous . . .

BR,
DaysGSM :)

Juanperez

01-07-2003, 22:28

OK, DaysGSM.
Where is the protection?
(photo, please)
Can you be more explicit on the procedure?

Greetings.

DaysGSM

01-08-2003, 00:05

Please , all GSMFORUM members , forget auto-ignition cable !
Maxim is the best and need test point , why you should be
smartest than Maxim ?????????????and not need test point ???
Its true , C55 have hard ''test point'', in 1 Resistor extreme . . .
Just email me . . .

Best Regards to all,

DaysGSM :p

please check ''Cheaters section''

claudio_gsm

01-09-2003, 12:52

DaysGSM
i have the picture *hard ''test point'', in 1 Resistor extreme . . .*
.. and .. don``t work for .. me ..
i remove the protection ( the resistor ) because i want read the full flash or the eep .
replay me .. DaysGSM .. help plzzz!

comunicatel

01-11-2003, 13:51

Could You post this photo somewhere or send me via email to comunicatel@mail.bg

Bigbrothers2000

01-11-2003, 20:22

yes can somebody post the picture please

Deltas

01-12-2003, 18:09

Hi !
i want test point too !
i have C55 unlock soft but i can not active my phone in flash mode !

bcool

01-12-2003, 20:23

If u have C55 software should ask the vendor for support, dont u think??

zurrdo

01-12-2003, 22:11

Test point ok in C55.

You have to remove one resistor, i unloocked whit Maxin dongle.

The telephone works well without that resistor.

Juanperez

01-13-2003, 07:42

Hi, zurrdo!
can you send me your email to comment details?

Abe

01-14-2003, 03:21

???????
Soft for unlock c55 is 500$ and u still have to open phone?
Man...where is the world going?....

claudio_gsm

01-14-2003, 11:01

zurrdo
without dongle its work read flash of C55 ..?
if i make the test point ... its work for me..without dongle ..?
plzz test by me ....
thz in advance ..

CMV_2K

01-14-2003, 11:26

Without the dongle, you can use it is as a flasher !!!

But u need the dongle for unlock !!!

Best Regards

claudio_gsm

01-14-2003, 11:37

yes .. but .. who ?
who i can make a back_up of full flash of C55

rizapn

01-14-2003, 11:48

Even only for flasher, I think we still need to open the C55 phone right? Cause, I try to read (flash) mine *without* removing that resistor (R500 near the crystal, 10K value) and failed. I can not do that ...

RizaPN

rico1

01-15-2003, 07:26

Hi all!
where is resistor? :eek:
Best regards!

Quang Thao

01-16-2003, 18:30

hi all
please go to

www.thienlong.com

"Download" section or "so do cap" section.
I have just post test point for C55 and data cable for it on my server.

Thank to deltas.
best regards

Murphy

01-20-2003, 01:57

Originally posted by Abe
???????
Soft for unlock c55 is 500$ and u still have to open phone?
Man...where is the world going?....

Hi,

Man... ask Siemens ppl :-)

Best Regards,

kaczor

01-22-2003, 10:40

Originally posted by zurrdo
Test point ok in C55.

You have to remove one resistor, i unloocked whit Maxin dongle.

The telephone works well without that resistor.

But not work oryginal flashers etc ... :)

Own

01-23-2003, 20:34

Hi.......Quang Thao
i'm try resolder flash [f320c3tc] dump file to c45 [from good phone C45] by labtool.....all ok [not replace any it]
from A50 go to C45 without problem
Thnx
Own :D :D :D

Own

01-23-2003, 20:36

after dump and open phone show wrong sw , it use sw unlock by Maxim......ok yet
Thnx
Own :eek: :eek: :eek:

sergioems

01-24-2003, 14:49

test point already have now thanks to Quang Thao.

and what about software to unlock it?

Sergey[Power User]

01-26-2003, 06:17

>>The telephone works well without that resistor.

>But not work oryginal flashers etc ...

"No bootcore detected" message will appear, yeah?? :D

JAMLU

01-27-2003, 21:19

Hi friend

I¡am From Huelva (Spain) and i need unlock some c55

contact at jamlu@inicia.es please

Best regards from Spain

DUSKnenixs

01-30-2003, 04:06

someone
can confirme that
is need remove
resistor from c55
but is need to putt a wire from that place (resistor) conected to gnd(cable)?or only remove resitor and thats all?
please confirm that
thanks;)

Otheris

01-30-2003, 07:52

Only remove resistor.

KSAT

01-30-2003, 09:47

Does anyone already have Read Fullflash from c55 :confused:
PLEASE someone send me FullFlash File
My C55 is Dead after Siemens EEPROM tool by Skylord

Alien-9

02-15-2003, 18:40

Where is the c55 cable schematic? Please somebody help me! Use test point or no?

alien-9@freemail.hu

Diddl

02-19-2003, 11:00

Is there also such a testpoint / resistor protection on the S55? :confused:

Bogi

02-21-2003, 11:37

I think,that it is enough to put left end of resistor(when quartz is under it) to gnd.So processor receive other HW version and use other bootloader.