View Full Version : Cect Q380 supported?
lix_DAVAO
02-06-2009, 01:59
unit is Cect Q380 with Spreadtrum CPU SC6600D5-180G cannot be detected by Pinfinder. I think because it's not in the list of supported cpu.
pls support this unit this is common unit already
TIA:)
http://i219.photobucket.com/albums/cc113/limuelgrabato/Picture012.jpg
InfinityHelp
02-06-2009, 11:57
hello!
did you select SPD processor type in pinfinder?
lix_DAVAO
02-07-2009, 02:03
yes sir many times tried. is my box a problem? it can detect other cpu type especially MTK but not yet ever success in SPD.
lix_DAVAO
02-07-2009, 02:12
http://i219.photobucket.com/albums/cc113/limuelgrabato/Picture015.jpg
pinfinder log
software version: 1.17
cable type: 1x18 (L18A)
platform: SPD: Spreadtrum SC6600M, SC6600R
searching adapter at COM3...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now (not required but recommended) !
detecting pins...
failed to detect pins
time required: 26 sec
Power Off !
Set parameter to value 20 (or more) and repeat operation (parameter "Finder activation tries")
InfinityHelp
02-07-2009, 12:02
hello!
does phone is able to be powered On from box power?
bochot_2009
02-12-2009, 10:39
can anyone know how to repair keypad failure??? pls help me.......