guljee786
02-06-2009, 09:32
i have a sunny Ericssun k770 this model have in infinity shell but back up file is not in support aria
its problem power on and blinking
i do format the phone and its ok but its screen damage and want to calibration touch screen i do all mod(1-5) for touch screen but still phone ask to touch screen calibration.
how sovled this problem
==== log: [2/6/2009 1:09:53 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 9 sec
Remove/Install battery now !
==== log: [2/6/2009 1:11:12 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-3)...
1 2 3 4 6 7 8 9error:
detection failed (8 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 13 sec
Remove/Install battery now !
==== log: [2/6/2009 1:11:47 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 4
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-4)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !
==== log: [2/6/2009 1:12:26 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 5
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-5)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 7 sec
Remove/Install battery now !
==== log: [2/6/2009 1:15:57 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 5 6 7warning: wrong packet cs
8error:
detection failed (8 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 10 sec
Remove/Install battery now !
==== log: [2/6/2009 1:16:58 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 25 sec
Remove/Install battery now !
==== log opened: [2/6/2009 1:26:46 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v2.76
S/N: 5E76:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
Guljee
its problem power on and blinking
i do format the phone and its ok but its screen damage and want to calibration touch screen i do all mod(1-5) for touch screen but still phone ask to touch screen calibration.
how sovled this problem
==== log: [2/6/2009 1:09:53 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 9 sec
Remove/Install battery now !
==== log: [2/6/2009 1:11:12 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-3)...
1 2 3 4 6 7 8 9error:
detection failed (8 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 13 sec
Remove/Install battery now !
==== log: [2/6/2009 1:11:47 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 4
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-4)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !
==== log: [2/6/2009 1:12:26 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 5
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-5)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 7 sec
Remove/Install battery now !
==== log: [2/6/2009 1:15:57 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 5 6 7warning: wrong packet cs
8error:
detection failed (8 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 10 sec
Remove/Install battery now !
==== log: [2/6/2009 1:16:58 PM] ====
COM4 [VCP0] selected
module v2.76
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7303:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: S_R_DICOTEC_C968_KBC_V1.12
Version: C968_V1.0
detecting structure #2...
0 done
44 byte(s) read
imei: 35755600007439
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 25 sec
Remove/Install battery now !
==== log opened: [2/6/2009 1:26:46 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v2.76
S/N: 5E76:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
Guljee