new models nektel a200 good jop after format

[GSM_BB5]

COM4 selected
module v2.73
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C803:0000
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000000:18E59F00000000
flash: AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000000:18E59F00000000
flash: AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98000300000000:18E59F00000000
flash: AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000000:18E59F00000000
flash: AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.76F8F1BF.[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_3_7.BIN_B4D90754].rpl
New firmware detected (2.73) :
N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_3_7.BIN
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 76F8F1BF
identification#1 protocol ver: 04
ver. sw 1: N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_3_7.BIN
ver. sw 2: N66_ABROAD_2CDGB_S5LCD_V1.3.7, ABF8264B
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98000300000000:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_3_7.BIN]...
file saved: C:\Documents and Settings\gsm_bb5\Desktop\a200\eeprom[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_3_7.BIN]_20090207-233507.B0E.bin
flash: 98000300000000:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98000300000000:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_76F8F1BF_N66_ABROAD_PCB01_GPRS_MT6225_S0 0.N66_ABROAD_2CDGB_S5LCD_V1_3_7.BIN_B4D90754_20090 207-233531.B0X.bin
Finished, time used: 135 sec
Remove/Install battery now !

[InfinityHelp]

hello!

please share with us this phone full backup!
mt62xx@gmail.com

[faisal_fs]

hilo infinty team plz help me


COM4 [VCP0] selected
module v2.83
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:E803:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:00000000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:00000000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 98000300000001:00000000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 98000300000001:00000000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:00000000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:00000000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 000000000000000018F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.99482F9E.[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_4_6.BIN_C8EF811E].rpl
identification#1 detection finished
device-id: 99482F9E
identification#1 protocol ver: 04
ver. sw 1: N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_4_6.BIN
ver. sw 2: N66_ABROAD_2CDGB_S5LCD_V1.4.6, E17E1037
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98000300000001:00000000000000
checking area [00000000]: 00000000-00FFFFFF...
Can't detect ffs/eeprom area
Do you want to use standard ffs/eeprom address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs/eeprom address selected by user
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_ S5LCD_V1_4_6__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\N66_ABROAD_PCB01_ GPRS_MT6225_S00.N66_ABROAD_2CDGB_S5LCD_V1_4_6__ffs _20090703-181726.B0E.bin
flash: 98000300000001:00000000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98000300000001:00000000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\N 66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2CDGB_S 5LCD_V1_4_6__system_log_99482F9E_C8EF811E_20090703-181756.B0X.bin
Finished, time used: 321 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !



but set not power on plz urgent help me

[InfinityHelp]

hello!

restore backup:
C:\Program Files\InfinityBox\ChineseMiracle\N66_ABROAD_PCB01_ GPRS_MT6225_S00.N66_ABROAD_2CDGB_S5LCD_V1_4_6__ffs _20090703-181726.B0E.bin
load it as eeprom and write to phone.
power On phone and make Safe format