View Full Version : BF4 10r 52L
Need help for unlocking a bf4 10R 52L....
Maibe a manual method ...
THX VERYY MUCH!!!!
the only manual method i know is changing the board with an unlockd one:D
no free solution yet.
even if u can use hex for unlocking u still ned software with bootloaders for this new type of flash.
and this is not for free...
for more info contact me on icq
I got sw for flashing this new flash kind (Thompson) and working of course (test it on 10r 52k ).....ok.....maibe can anyone(who has a unlock sw for this types) send me a locked back up and the unlocked flash......
Thx very much!!
u can search the forum for the thing u need.
it was postes some time ago.
AmunRe: could you send me your soft? I have a BF4 10R Thomson to read. Thanks
For unlock software: http://unlock.prolidi.cz/software.html
tresh_sd@freemail.hu
hi my friend Amunre
Can you send me this flasher at g_siewe@hotmail.com ?
Thanks in advance
YOUR GUY GILSIE
The soft works only with dongle...
Sorry...
Send the dongle too :-)
My post address is... :D
TreshSD
YOU CAN UNLOCK IT WITH (bfwray5.5)
I HAVE THE SOFT BUT HE NEED 2 ARMADILO KEY
AND I DONT HAVE THE (REG_PROJ.ARM)
Originally posted by AmunRe
I got sw for flashing this new flash kind (Thompson) and working of course (test it on 10r 52k ).....ok.....maibe can anyone(who has a unlock sw for this types) send me a locked back up and the unlocked flash......
Thx very much!!
Make a LOG from serial port when successful operation made and send me. I'll try to make flasher.
DUSKnenixs
01-12-2003, 14:51
hello all
i have read this flash whith henrich 1.8 and whiout any problems i only need to know whath rigth adress to modify
thanks
br
DUSK
flash file;)
http://geocities.yahoo.com.br/dusk_nenixs/
u had read it, but after writing it back? does the phone works ok?
DUSKnenixs
01-12-2003, 14:59
i do not make this experience i only read and didnīt try wrigth back. only if i have a location to unlock
open flash in hex editor, if you see repeat caracter, no goot flash back. i think henric 1.8 no read writ new flash.
DUSKnenixs
01-12-2003, 20:27
okey only one solution whaith for free soluiton;)
DUSKnenixs: you have mail at dusk_nenixs@hotmail.com
BR
Originally posted by DUSKnenixs
i do not make this experience i only read and didnīt try wrigth back. only if i have a location to unlock
Please, make LOG of serial port and sent it to me...
DUSKnenixs
01-13-2003, 02:02
thanks i will try
cant unlock 10R freely contact me!!
Please, anybody send me solution or software to unlock 512
10R - BF42L - 52L82BE
Thanks
alelu@pisem.net
@alelu
Can you read flash from this Alcatel?
Yes, Henrich 1.8 read flash Thomson 4Mb
but blocks 30000, 3f000 and more contains errors always
I read flash 4-5 times, but errors always are in this blocks.
Originally posted by alelu
Yes, Henrich 1.8 read flash Thomson 4Mb
but blocks 30000, 3f000 and more contains errors always
I read flash 4-5 times, but errors always are in this blocks.
What kind of errors? CRC errors, read errors?
Please, make log from comport and send it to me ( even is phase "Connect" ).I am trying to solve problem with this ST flash, but I need more info.
I have readed with BFxTool182 and YES it has erros...
I tried to unlock with BF3-BF4Unlocker but after write back the flash the phone was dead.... I`ve flashed back the full backup flash, corrected CRC and the phone is working even today.
I wait for solution...:(
P.S. - What is M-service version?
well i dont think that unlocking this version is a big deal.....just d/l the Wray's free soft from www.******.com and unlock as many you like....thankx
Best regards