ME45 cable for C/S55

[jaelanicu]

Can I use my ME45 service cable for flashing C/S55?

[chipi]

http://www.trapiweb.com/downloads/c55.gif
It is possible to use the cable of unlock for these models. But the conector of x55 is mas thin , you have to smooth or reduce with a cutter. If the cable you want to use it is the original one for the present not the position of the pin 7 and 8

Original x45
1 GND
2 reconigtion charger
3 Charger in
4 FBatt+ I Voltage for external accessories.
5 TX O Serial interface
6 RX I Serial interface
7 ZUB_CLK I/O Clock line for accessory busUse as DTC In data operation
8 ZUB_DATA I/O Data line for accessory bus.Use as CTS in data operation

X55

Pin1 = Auto_Ignition
Pin2 = GND (mass) negro
Pin3 = DATA Out = rojo
Pin4 = DATA in = naranja
Pin5 =? (Pull down = 112K)
Pin6 =? (Pull down = 112K)
Pin7 =? (Pull down = 112K)
Pin8 =? (Pull UP)
Pin9 =? (Pull UP)
Pin10 =? (Pull UP)
Pin11 = Ext. Micro GND
Pin12 = Ext. Micro input

[jaelanicu]

Ah, I see... It just need a small modification.
A small switch would be nice... :)

Thanks chipi. ^_^

[miope]

i have a problem whit the mod ... my cable it is a original x35 with no Auto_Ignition it was only connected 3 pins (3,5,6), i done the mod to (2,3,4...slim) connect and my phone work in almost any soft (vissie, x35exp, ...) but it turn off the phone...

now i connect one more pin(a red one that was not connected in x35) and now the the phone is more stable...(signal of charge on)

but any siemens soft don't work :mad:
the Java_enabler_by_Skylord don't work (stoped!!), but the m50_java worked with 3AA batteries connected to pin +1,-2,
how can i test if the java is unlock??

Can anNyBody help me ... what a fu... is the problem with mi cable


thanks:D :D