how to unlock treo 650, plz hlp

[peter002]

hello all. i hav treo 650 to unlok. plz tell me whats the procedure to unlok that fone?? thanx to alll

[peter002]

i m not able to install the drivers supplied with fg setup.. what drivers i need to install to unlok this fone?>??????

[peter002]

helllooooo..........
is there any product supporter left in this section???????
i need hlp here mr. fast suppooorts.....:(:(

[...:::JamalMustafa:::...]

hello all. i hav treo 650 to unlok. plz tell me whats the procedure to unlok that fone?? thanx to alll

treo650 step by step unlock

Reading Your phones Unlock Codes

1. Run treo read code software
2. remove any card inside in phone
3. Remove Treo Battery Cover & Power on your Treo
4. Connect USB Sync Cable (as supplied with phone)
5. Place Phone in “Test Mode”
- Press and Hold Button on USB Cable
- Using Pen Press and hold for 1 second Reset button in Back of Treo
- Release reset button, then release Active Sync button on Cable
- Display should be red/blue etc and detail boot loader version
- Phone is now in Test Mode
If Windows now detects a new device (this will happen the first time you put a treo 650 into
test mode, then you will need to do the following
(you will only need to do this once)
1. A new hardware wizard will appear. Select “No, not this time” if asked about connecting to the internet
2. Then on the next screen Select “Don’t search, I will choose driver to install.” Click on
the “Have Disc … “ button
3. Select the drivers, direct windows to the folder containing the Treo HTTC drivers, if presented with a Windows warning about Microsoft signing of drivers. Choose “Continue Anyway”
4. Windows will now install the drivers.
5. Click on finish on next screen
6. Windows has finished installing New Hardware .You will only need to do this once per PC.
7. Now click “Do Job” on SW, (codes should be displayed in under 5 Seconds)
Entering Codes
1. Remove Treo battery, unplug cable
2. Insert incorrect SIM card (1 the phone does not accept)
3. Power on Treo-650, “Sim not allowed” is displayed, click “ok”
4. Go to the dial pad, and use the stylus to enter code exactly as displayed in the software. Then press “Dial”
5. Phone will reset and display “sim lock removed”
Phone Unlocked !!!!

[...:::JamalMustafa:::...]

PalmOne:

Treo 600 / 650
1. Power on phone with a non-cingular sim inserted
2. When phone is powered up dial any number, it will ask you if you want to turn phone on, click yes
3. It will say "your phone cannot be used with this SIM card" click ok
4. It will say "Network Search" click cancel
5. using the dial pad do the following: enter *#*#code# then press dial on the screen.
6. It will say the sim lock has been removed from your phone

Treo 680
Power on with non-cingular sim
It will then say "Your phone cannot be used with this SIM card"
Click ok
Click dialpad tab, bottom of the screen far left
Using stylus type *#*#code#
Press the green button
It will then say The SIM Lock has been removed from the phone"

Treo 750
Power on with NON-Cingular sim
Using onscreen keyboard enter unlock code

[srkhan]

treo650 step by step unlock

Reading Your phones Unlock Codes

1. Run treo read code software
2. remove any card inside in phone
3. Remove Treo Battery Cover & Power on your Treo
4. Connect USB Sync Cable (as supplied with phone)
5. Place Phone in “Test Mode”
- Press and Hold Button on USB Cable
- Using Pen Press and hold for 1 second Reset button in Back of Treo
- Release reset button, then release Active Sync button on Cable
- Display should be red/blue etc and detail boot loader version
- Phone is now in Test Mode
If Windows now detects a new device (this will happen the first time you put a treo 650 into
test mode, then you will need to do the following
(you will only need to do this once)
1. A new hardware wizard will appear. Select “No, not this time” if asked about connecting to the internet
2. Then on the next screen Select “Don’t search, I will choose driver to install.” Click on
the “Have Disc … “ button
3. Select the drivers, direct windows to the folder containing the Treo HTTC drivers, if presented with a Windows warning about Microsoft signing of drivers. Choose “Continue Anyway”
4. Windows will now install the drivers.
5. Click on finish on next screen
6. Windows has finished installing New Hardware .You will only need to do this once per PC.
7. Now click “Do Job” on SW, (codes should be displayed in under 5 Seconds)
Entering Codes
1. Remove Treo battery, unplug cable
2. Insert incorrect SIM card (1 the phone does not accept)
3. Power on Treo-650, “Sim not allowed” is displayed, click “ok”
4. Go to the dial pad, and use the stylus to enter code exactly as displayed in the software. Then press “Dial”
5. Phone will reset and display “sim lock removed”
Phone Unlocked !!!!


Now click “Do Job” on SW, (codes should be displayed in under 5 Seconds)
Entering Codes

<Where is unlock software> !!!

[...:::JamalMustafa:::...]

Dear i post only guide line no software dear
br
jamalmustafa

[luskao]

Software it's in the server. About drivers follow the manual that JamalMustafa said and will be done within a few seconds. I'm sorry but I'm busy on those days

[peter002]

i hav done all as xplained here.... but i got one problem.. wen i run the fg code reader software it says that 'cant open the comport. what shud i do????i m stuck here.. everything i did same as said here..now what shud i do??

[luskao]

Do not use code reader try with direct unlock(I mean no TXT)

BR

Luskao

[peter002]

fone unloked with code readr usb.. but for that firstly i restore my pc then installed the drivers again and repeated the proces... thanx, fone i unloked now...