ahmedasmet
02-11-2009, 18:32
module v2.73
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:CD03:0008
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: A25_B_Z18D_F_6.GEMINI.1.0
Version: VIGORTECH25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-4)...
0 1 2 3 4 5 7 8 9 10 11 12 13 14 15 17 18 19error:
detection failed (18 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 9 sec
Remove/Install battery now !
i try method 1 and 2 .3 .4
but still failed
and try
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
and i upload the full flash in this link
http://www.4shared.com/file/87159353/df34afb7/flashA25_B_Z18D_F_6_PCB01_GPRS_MT6225_S00GEMINI_1_ 0BIN_20090211-171731B0M.html?dirPwdVerified=6127193a
thanks infinity team for Support us
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:CD03:0008
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: A25_B_Z18D_F_6.GEMINI.1.0
Version: VIGORTECH25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-4)...
0 1 2 3 4 5 7 8 9 10 11 12 13 14 15 17 18 19error:
detection failed (18 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 9 sec
Remove/Install battery now !
i try method 1 and 2 .3 .4
but still failed
and try
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
and i upload the full flash in this link
http://www.4shared.com/file/87159353/df34afb7/flashA25_B_Z18D_F_6_PCB01_GPRS_MT6225_S00GEMINI_1_ 0BIN_20090211-171731B0M.html?dirPwdVerified=6127193a
thanks infinity team for Support us