View Full Version : M/MT50 writing BA20
Please does anyone know is exist some tool which can write full flash on M/MT50 Ba20 chip(bin format)
Thanks a lot in advance
Hello Ero
Did you try demm solution http://members.aon.at/hnb???
How to backup M\MT 50?
I don`t see that UniSiem have M and MT 50 ?
regards
Thanks a lot Format1,
but demm made a mistake.
Unisiemens can read but can't write M/M50 with BA20, also like SL45, till today I don't see or found any program which can write fullflash in bin format chipset BA20.
But maybe someone know better from me
Thanks for all answers which can help me
WBR
I have Unisiemens to suppot BA20 chip to write. Mail me and send to you. I tested on 4 phone dead. Thist soft. send to me by Locer on GSMforum (good man!!). You must used SL4x to read and write. I am for change IMEI soft. too. All, i used to repairt 4 phone dead.
I read flash and eeprom M50 working. (eeprom 2 min, flash about 10 minit)
I write flash and eeprom (the some time) --> Buzz, Buzz, not ON the phone or Worng Soft.
Now, i used Unlock MT50/M50...The phone OK, but diferent IMEI
I used other soft. to change IMEI (C45) ... The phone Buzz or Wrong Soft.
I used Unlock MT50/M50... The phone OK!!!
In other phone, I used Unlock MT50/M50 ---> Eeprom Damaged
Now, i only write eeprom (eeprom that ok phone M50 BA20 chip) -> BUZZ BUZZ
I used MT50/M50 to unlock and the phone OK, no necesary changer IMEI
All soft. send to me by Email by Locer
All people want thist Tools, please mail me to
etani2002@hotmail.com
Please, not put here "sent to me"...please mail me
BR
ALRU
I write flash and
I
Originally posted by erogsm
Thanks a lot Format1,
but demm made a mistake.
Unisiemens can read but can't write M/M50 with BA20, also like SL45, till today I don't see or found any program which can write fullflash in bin format chipset BA20.
But maybe someone know better from me
Thanks for all answers which can help me
WBR
i didn't make a mistake!
i never said that's unisiemens is capable of writing to BA20 chips! it's only possible to read from them!
for both solutions on my page (early bird and repair) you don't have to write the fullflash!!
you only use winswup and the eeprom tool, which both can write BA20s
Sorry demm if you are angry, I would like to tell is it possible that nobody have solution to write flash file into this BA20 chip.
I don't understand what is so hard to make some little changes (Nutzo) in your Knok software. It looks very good but doesn't work read/write with MT/M50 BA20 chip.
Thanks a lot for all