reynaldkatkat
02-26-2009, 04:17
Sir! i have a phone to openline model k320. I check it before i procede in unlocking and
phone is in good condition. Here is the logs of read info.
-- Reading Info---------------------------------------------------------------
User selected phone K320 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356706-01-927814-4
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
GDFS Simlocks :
Lock 0 = LOCKED (01) [5/5] (Network)
Lock 1 = OFF (00) [5/5] (Network Subset)
Lock 2 = OFF (00) [5/5] (Service Provider)
Lock 3 = OFF (00) [5/5] (Corporate)
Lock 4 = OFF (00) [5/5] (SIM Card)
Lock 5 = OFF (00) [5/5] (Extended)
Operator code = 515-05
Done.
But when i try to select access mode testpoint and press the Execute "Security Bypass"
Operations its only stocks on 96 percent! here is the screen shot.
when i try to turn on the phone, it does'nt on already. But everytime i connect in normal
mode and try to read info. No error. heres the logs.
OTP Status = LOCKED
OTP IMEI = 356706-01-927814-4
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
GDFS Simlocks :
Lock 0 = LOCKED (01) [5/5] (Network)
Lock 1 = OFF (00) [5/5] (Network Subset)
Lock 2 = OFF (00) [5/5] (Service Provider)
Lock 3 = OFF (00) [5/5] (Corporate)
Lock 4 = OFF (00) [5/5] (SIM Card)
Lock 5 = OFF (00) [5/5] (Extended)
Operator code = 515-05
Done.
Then i try to press the Reset User Lock it gives me an error like this.
--- Reset User Lock------------------------------------------------------------
User selected phone K320 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356706-01-927814-4
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Error : missing [CS] loader signed with CID50 for Color = RED
Error : Failed
What should be the error? I'm using a full bar battery and also use a supply in the box
but same problem.
phone is in good condition. Here is the logs of read info.
-- Reading Info---------------------------------------------------------------
User selected phone K320 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356706-01-927814-4
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
GDFS Simlocks :
Lock 0 = LOCKED (01) [5/5] (Network)
Lock 1 = OFF (00) [5/5] (Network Subset)
Lock 2 = OFF (00) [5/5] (Service Provider)
Lock 3 = OFF (00) [5/5] (Corporate)
Lock 4 = OFF (00) [5/5] (SIM Card)
Lock 5 = OFF (00) [5/5] (Extended)
Operator code = 515-05
Done.
But when i try to select access mode testpoint and press the Execute "Security Bypass"
Operations its only stocks on 96 percent! here is the screen shot.
when i try to turn on the phone, it does'nt on already. But everytime i connect in normal
mode and try to read info. No error. heres the logs.
OTP Status = LOCKED
OTP IMEI = 356706-01-927814-4
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
GDFS Simlocks :
Lock 0 = LOCKED (01) [5/5] (Network)
Lock 1 = OFF (00) [5/5] (Network Subset)
Lock 2 = OFF (00) [5/5] (Service Provider)
Lock 3 = OFF (00) [5/5] (Corporate)
Lock 4 = OFF (00) [5/5] (SIM Card)
Lock 5 = OFF (00) [5/5] (Extended)
Operator code = 515-05
Done.
Then i try to press the Reset User Lock it gives me an error like this.
--- Reset User Lock------------------------------------------------------------
User selected phone K320 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356706-01-927814-4
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Error : missing [CS] loader signed with CID50 for Color = RED
Error : Failed
What should be the error? I'm using a full bar battery and also use a supply in the box
but same problem.