View Full Version : @ Zulea Terminator & 4 Locks closed
New firmware versions of Ericsson, when try to unlock with Terminator or Div get Four locks closed.
We need an update, cause there are too many useless phone right now with this problem.
Thanks in advance
Terminator dongle NOT use any smartcard to enter boot mode.
In fact, the Terminator dongle use a 'bug' discovered inside
AVR CPU to bypass the boot authority.
For that reason, all the phones with new AVR ASIC
can become 'all 4 locks closed'.
If somebody can give informations on exactly
what phones this happens (all 4 locks closed),
will help us a lot in finding the problem.
More exactly, hardware version, phone model, software version.
All of this problems NOT happens on DIV software
(or any other flasher software) because the Full version
of dongle (flasher+unlocker) not use the 'AVR bug' to
bypass the boot authority. In fact, all the Flasher (DIV)
dongles have a small SmartCard inside who full emulate
the original EMMA2 SmartCard, and this allow working on any
new version (revision) of AVR CPU (ASIC).
So, again, the last flasher software version (v5.0)
and DIV dongle NOT cause this problem (all 4 locks closed) !!
To get the last version of flasher software (v5.0) ask your dongle vendor.
ONLY the Light dongle (Terminator), and the old flasher software versions make this problem (all 4 locks closed) on certain new week phones.
And the reason why was described here.
DIV
the new Terminator kills Ericsson T200 (make the phone 4 locks locked, and counter is 0 = dead!) as well.
i flahs with div v4.1 t200 4 locks closesd now phone is dead
hi,,
dear div author will this update let us use a3618 and r600 unlock ,,as all previous ver could not do it.
it was promised that update would sopport a3618 and r600 unlock and flash .
even unlock sol is much awited as it not work .where as logger sol work fine ,,so i hope no soft ver prob.it simply not work on a3618.
please support your coustmers.:confused:
reg
nik
GSM Brothers
01-14-2003, 09:13
I think this Terminator you have is cracked version.I tested with my Div 5.0 and Terminator dongles and working 100% no all lock close.
hi,,
gsmbrothere ,, i have bought it from u only ,,
ignore my last mail as i not have div4.0
pls give div5.0
reg
nik
tested 10000% I donŽt have a terminator cracked
If you see other topics you find that , this problem is common
Wait for new versions and you get four lock closed.
Tomorrow I will make a probe with smartcard inside.
IŽll post the results with div and ver 5.0
My damaged model is T200 02W42 I hope that this help you
Gsmbrothers i have bought terminator from you and i've got same problem in t200,please try to find any solution for repairing it.
Im having problems also on T200 and T300. And of course, my Terminator is not cracked.
@pez8210
I think that the date of the phone doesnŽt really matter. Today I unlocked one with that same date and no problems at all.
Best regards
this is not an advertising, but our server still work with an original smartcard, nad we never get that problem.
i believe that zulea did a good work, but original mean original, dont know if emulating the smartcard will allow you to unlock and flash bug corrected phones or not
server still up
Soon will be an update to flasher software (DIV) who will repair all 4 locks closed (some kind of RESET GDFS function).
All owners of full software (DIV) - NOT Terminator - just stay tuned on your dongles vendors updates.
DIV
Thanks Div or maybe I must to say Zulea :)
Hi ok then Zulea start to find out how to fix this problem,if it's necesary i'm ready to pay for an upgrade to make terminator also flasher
Hi all !
I have DIV dongle, I buy from gsmbrothers, I think it don't cloned, I'm unlock more than 50 phones. It's work verry well. No error whith me ;)
Take care Sun
I was unlocked 350 Phones with no problem but last 2 becomes deads
Be carefull
Burnt Cobba
01-17-2003, 02:18
any news in the pipeline for T66? :)
thanks
al