View Full Version : Problem with DCT-4 flasher. Button "Flash" disabled?
Strange problem with DCT-4 flasher (free HEX).
All time work fine but Yesterday I'm want to flash 6310.
Flasher opened, dongle detected but button flash disabled, other function work. This problem on all flashers who work with free HEX dongle.
Somebody knows what the problem with flasher???
YES
You need from PATCHED MCU
PPM is normal.
your MCU version is too big for flasher.
I did flash 6310i 5.22 whit 4.06 => Dead phone
After that I did flash it whit 5.10 patched and PPM - K.
The phone is 100% working whit bulgarian language:)
That is my experience.
Regards
Thanks for reply but you don't anderstud me.
"Flash" button disabled for all phones.
I'm can't flash because, can't press flash button!
alnasser
01-15-2003, 17:35
this proplem came with me only with new flash for ((6310i v5.22))
Thanks for all!
Problem solved!
alnasser
01-15-2003, 17:46
but how?????
@NSerN
May I sincerely ask you to share your experience with all members since you would have expected us to help you, too, before you figured out the solution all by yourself ?
Thank you.
I don't say what I can't flash 6310i v.5.22
I wrote: I don't flash with any flashes for any phones(supported with flasher). I solve my problem (problem was in my system)
but I'm can't flash new flashes as you!!!
But now it's litil problem!
I can flash 6310i v5.22. It is very easy.
For first. When you load MCU and PPM, the flash button is locked, isn't it?
You need from PATCHED for a china box MCU. That is the problem. I flash 5.22 whit 4.06, the result was "DEAD PHONE". The phone is not dead now. I flash it whit patched 5.10 / www.id2.cz - section software->nokia flashes/ But you need from new FIA for 6310i too.
The best unlockers from my country said: " Don't try again you will kill the phone for ever. You can't repair it whit the china box. You need from Griffin." He he he
That is not a true. I did repair the phone whit a china box. The phone have bulgarian language now. No problems to put any lang. www.brad.gsmunlock.sk
You need from patchet MCU and lang pack /the lang pack is not patched/.
I don't know where to download patched 5.22, but you can use patched 5.10 /PPM must use 5.10 PPM, I try use 5.22 PPM whit 5.10 MCU, the result was -> Operator name font as on SAGEM 922/:))))))))))))))))))))))
The @NSerN's problems was -> attrib +R, He is my friend now.:)
Guys I need from hex and scheme for DCT 3/4 combo box. I wanna test enythings.
iskamdaznam@yahoo.com
Regards