View Full Version : MOMO DESIGN MD2 - after Vodafone cable- ''3g'' freeze on screen on startup
crossings
03-06-2009, 10:35
MOMO DESIGN MD2 - after Vodafone furious cable - ''3g'' freeze on screen on startup
any solution?
sohailkh
03-06-2009, 10:48
momo design md2 - after vodafone furious cable - ''3g'' freeze on screen on startup
any solution?
i think no slouation or wait as soon as possible
br
;)
crossings
03-06-2009, 10:55
i tryed this because cable pinout post it here http://forum.gsmhosting.com/vbb/showthread.php?t=659253 not work.only error ''usb -usb device not recognized'' , i also try it direct wire connections ,same error. so final and last..try was vodafone furious cable=phone freeze with 3g logo on startup. So...if is software related problem ,no way to connect this phone with above link pinout.
crossings
03-06-2009, 11:11
any official Furious Team pinout for md2? Support page don't have it.
::.imeimate.::
03-06-2009, 12:48
http://forum.gsmhosting.com/vbb/showpost.php?p=4022077&postcount=1
crossings
03-06-2009, 13:29
that pinout not work - ,same error -or my phone was comunication failure before, altho i open it the phone and all connections were straight.
sohailkh
03-06-2009, 13:38
that pinout not work - ,same error -or my phone was comunication failure before, altho i open it the phone and all connections were straight.
check this pinout br
for usb: white = D+
green = D-
red = Vcc
black = gnd
pin1 = white = D+
pin2 = green = D-
pin3 = gnd = black
pin7 = red = Vcc
;)
crossings
03-06-2009, 14:04
same pinout ,same error.
usernome
03-06-2009, 14:14
The pinout works great .
I unlocked one MD-2 yesterday .
All wires must be connected !!!
deepakgarg
03-06-2009, 14:19
same pinout ,same error.may b phone damaged with wrong cable used.most probably its hardware problem without solution.sorry cant help on hardware part
MOMO DESIGN MD2 - after Vodafone furious cable - ''3g'' freeze on screen on startup
any solution?
i have same problem, sloved by opening phone and remove battery for few seconde and re put it.
and voila phone revived hope this help you, its worked for me