View Full Version : i9 iphone cant writhe imei
PILONCILLO
03-07-2009, 22:09
i have some those phones.i can backup fw and any other work were phone is pwr of.the imei are changued to default and i need changue to the label but phone must be powred on and my pind finder cant.
pin 1 have 4.27 vots and infinity box too.i dont find any diode in my infinity for cut.(that manual is for very old boards only.my infinity is from unlockcellular and is rectangular short black box).
y try with fully chargued battery too and cant make job becouse never conect.
i had worked many others iphones like iphoe,p168 etc and all is ok.only in these model is the problem.
PILONCILLO
03-08-2009, 01:06
i begin tryng to writhe imei
but now i use the test point cable of rocker box(zulea not legija tp cable)
for pwer the phone and sw tray to conect but was unsusefull.
butttttttttttttttttttt...... i use the same boxes:infinity in com 8 .next pinfinder and tp cable like power and using cracked other chinese box imei was writed in pone in a second.
so infinity you have problem for conect these models of iphones in pwer on mode.i have pics and logs
InfinityHelp
03-08-2009, 23:59
hello!
4,27 is volatge which was cut by diode.
you just must find it where it is located.
after you remove it- pinfinder work will increase dramaticaly
PILONCILLO
03-09-2009, 20:33
hello!
4,27 is volatge which was cut by diode.
you just must find it where it is located.
after you remove it- pinfinder work will increase dramaticaly
sorry i cant find any diode.you produce it not me ,then please post were is located.
if there are many versions of boxes you must have diagrams or pic each one i suposse.
InfinityHelp
03-10-2009, 12:21
hello!
can you post your box PCB picture (components side)
it must be in good focus
i will try to suggest which diode must be shorted
PILONCILLO
03-12-2009, 02:26
here you are,i hope be usefull
PILONCILLO
03-12-2009, 02:46
my infinity box board pictures
InfinityHelp
03-13-2009, 01:41
hello!
looks like it is VDD2 ?
PILONCILLO
03-14-2009, 02:19
what do you mean?
here atached some pics of my boxes
first my infinity and next pin finder
InfinityHelp
03-15-2009, 00:08
hello!
remove VDD2, set jumper
check if this increase output voltage from 4,2 to +5v