View Full Version : plz help me about tech screen failt
hussainafridi
03-09-2009, 13:34
I have china mobile which is not working its tech screen.so i have tried by infinity but give me this eorr. i have used all mode . but not don.
plz help me about this.
------------------
LOG
COM7 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:A341:351C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: TWIN_6226_212_UI2_BYD7787_070730
Version: TWIN_6226
detecting structure #2...
0 done
44 byte(s) read
imei: 35010000111122
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 45 sec
Remove/Install battery now !
--------------------
hussainafridi
03-09-2009, 17:19
help me....................
InfinityN
03-09-2009, 22:02
I have china mobile which is not working its tech screen.so i have tried by infinity but give me this eorr. i have used all mode . but not don.
plz help me about this.
------------------
LOG
COM7 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:A341:351C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: TWIN_6226_212_UI2_BYD7787_070730
Version: TWIN_6226
detecting structure #2...
0 done
44 byte(s) read
imei: 35010000111122
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 45 sec
Remove/Install battery now !
--------------------
Did you tried to read text in your own message ?
hussainafridi
03-11-2009, 15:19
All flash file or only info of the flash fille send to suport.
plz help me about this, i m new user.
hussainafridi
03-11-2009, 16:49
here is my full readed flash file here (http://rapidshare.com/files/207964710/flash_TIANYU26_05C_PCB01_GPRS_MT6226_S01.TWIN_6226 _212_UI2_BYD7787_070730.BIN__20090311-070602.B0M.r)
InfinityHelp
03-11-2009, 23:42
hello!
we will check you file, it is downloaded
hussainafridi
03-12-2009, 06:59
Thanks infinity helper. we are waiting for ur good news.
hussainafridi
03-13-2009, 07:43
more we will wait ?........
hussainafridi
03-13-2009, 11:07
how much more time waiting.
hussainafridi
03-13-2009, 14:10
Not solve my problem.
InfinitySupport
03-14-2009, 16:02
You will be waiting until new "ChineseMiracle" will be released due to we add new features in "ChineseMiracle" update.
When it will be ready ?
It will be ready soon.
I have china mobile which is not working its tech screen.so i have tried by infinity but give me this eorr. i have used all mode . but not don.
plz help me about this.
------------------
LOG
COM7 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:A341:351C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: TWIN_6226_212_UI2_BYD7787_070730
Version: TWIN_6226
detecting structure #2...
0 done
44 byte(s) read
imei: 35010000111122
connection Ok
detecting structure #5 (mode-1)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 45 sec
Remove/Install battery now !
--------------------
bro try on mod1 if not then try mod2 . then try flash other wise u r in trouble
hussainafridi
03-16-2009, 13:17
i have tried all mode but not solve my problem.
InfinityHelp
03-16-2009, 23:42
i have tried all mode but not solve my problem.
hello!
read out full flash and send email to mt62xx@gmail.com
subject "touchscreen calibration failed"
hussainafridi
03-19-2009, 14:08
i have already uplaoded my full flash file u can see in massage list number 5.
hussainafridi
03-21-2009, 13:14
how much more waiting.?
InfinityHelp
03-21-2009, 16:50
hello!
in few days we will release next CM update