need sigmatel fxd T33i flash file.

[shuaib_kashish]

hello guys.
i need sigma fxd T33i flash file for infinity box.
(BOWAY25_GEMINI_PCB01_GPRS_MT6225_S00.T33+_TS70_TR IPLE_V010.BIN]_20090310-123253.B0M)

thanks in advance.

[InfinityHelp]

hello!

what problem with phone? can not be solved by format FFS?
please make full software backup before any operation (read full flash)

[shuaib_kashish]

phone was locked.i take full flash backup with infity and reset phone.
phone died after formatting.
now when i flash with its backup, infinity shows write error.what can i do now ?
thanks for quick reply.

[InfinityHelp]

hello!

need to see error log

[shuaib_kashish]

here is full process log with infinity box
COM12 [Serial2] selected
module v2.77
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
Action: write NOR flash
security area recalculation disabled
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:CE03:0005
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000000:FFFFFF00000000
flash: Toshiba T 16Mb
detecting chip #01 in region #00...
flash: 98000300000000:FFFFFF00000000
flash: Toshiba T 16Mb
detecting chip #02 in region #00...
flash: 98000300000000:FFFFFF00000000
flash: Toshiba T 16Mb
detecting chip #03 in region #00...
flash: 98000300000000:FFFFFF00000000
flash: Toshiba T 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. ............................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. ...............................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Area: Firmware
flash: 98000300000000:FFFFFF00000000
Write: Firmware
error: error# 0000FFFF
error: flash write error: 00000000:00002000
Write Fail
Finished, time used: 153 sec
Remove/Install battery now !

please guide me thanks..........

[InfinityHelp]

hello!

you must be using old version CM.
download newest

[suntysunty]

need sigmatel fxd T33i flash file.

[InfinityHelp]

need sigmatel fxd T33i flash file.

hello!

have you tried to solve your problem by format FFS ?
only after that try flashing.
post your requered flash file version.
it must be read in "read detailed information" mode

[gsmsikar]

phone was locked.i take full flash backup with infity and reset phone.
phone died after formatting.
now when i flash with its backup, infinity shows write error.what can i do now ?
thanks for quick reply.



i also have one fxd t33i which was working well but i have to format it with CM , but after formatting the set is dead ..


is there any help for this fxd t33i ..

[InfinityHelp]

i also have one fxd t33i which was working well but i have to format it with CM , but after formatting the set is dead ..


is there any help for this fxd t33i ..

hello!

ussualy program automaticly save eeprom backup.
(if you did not disable this option)
load this backup as eeprom and write back to your phone
it must be restore to original state

[gsmsikar]

hello!

ussualy program automaticly save eeprom backup.
(if you did not disable this option)
load this backup as eeprom and write back to your phone
it must be restore to original state

thanks sir for support ..

yesterday i was able to revive my phone from a file from infinity support area ..

thanks