View Full Version : How to read flash MT6235?
alunecosu_hd
03-10-2009, 12:01
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6235, E04
Hardware version: RATECH35_08A_HW
Software version: X8_XZY_MLB_1_6T07S01
Software date: 2000.00.00
Barcode: MT012345678901234567
imei: 357000008011931
imei: 357000008011434
Finished, time used: 5 sec
Power off phone now !
I need for editing language.
InfinityN
03-10-2009, 16:45
Hi,
Did you tried to read full flash like "Autodetect 6205-6227 NOR" model ?
What is the results ?
alunecosu_hd
03-10-2009, 22:32
I try but soft error read cip id ...I try 115200 speed but identic
InfinitySupport
03-10-2009, 23:32
Hello,
Please, post here operation log text with flash read try.
alunecosu_hd
03-12-2009, 10:38
COM4 [VCP0] selected
module v2.78
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
error: can't detect CPU id
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 23 sec
Remove/Install battery now !
baudrate 115200 and more....
alunecosu_hd
03-12-2009, 10:46
This is CESIM V800 mtk 6235 ...
I u select china miracle unkwon chip set may be its ok try to best ... And press thanks
alunecosu_hd
03-12-2009, 11:17
I try but not work.and with pind finder not detect pinout...
InfinityHelp
03-13-2009, 01:50
hello!
we will check what could be wrong
Hi all,
any news about v800 mt6235 pinout?
thanks for your aswer
alunecosu_hd
05-01-2009, 08:02
KSAT pinout exist see my post ...
alunecosu_hd thanx, but
I mean pinout for datacable(with pl2303) to read/write flash without phone disassembling
is it possible?
I same can not read flash
InfinityHelp
06-01-2009, 00:13
I same can not read flash
hello!
please provide logs, i will help by advice
hi all :)
here is pinout for datacable (pl2303) you can modify samsung d500 cable
count pins when you look on connector from left to right
8 - Тx
9 - Rx
17+18 - GND
you can use
FlashTool_v3.0840.00
to read\write flash
set operations method NFB
there are 2 firmware vesions i know last X8_XZY_MLB_1_7T08S0309 2009/03/09
master full can be found here http://rapidshare.com/files/236004708/Master_Full_V800_MTK6235_Pavel.7z.html
to update firmware you need to load scat_6235_Pavel.txt (Scatter-loading )
after flash make reset for factory settings password 1122
hello!
please provide logs, i will help by advice
i try, cesim iphone v800 and now cesim blackberry 9530 verizon v950 and always error cpu detect...
PHONE INFO
Action: read information
Model: Autodetect 6228-6230 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6235, E04
Hardware version: RATECH35_08A_HW
Software version: X8_XZY_BB_MLB_0_2T02
Software date: 2000.00.00
Barcode: MT012345678901234567
imei: 35XXXXXXXXXX
imei: 35XXXXXXXXXX
Finished, time used: 5 sec
Power off phone now !
READ FIRMWARE or READ FULLFLASH
COM3 [VCP0] selected
module v2.82
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: read NAND firmware
read mode: 01
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
error: can't detect CPU id
Release Power button now !
Boot Fail
Finished, time used: 12 sec
Remove/Install battery now !
Read Full flash in mode NFB (FlashTool)
I also have a chinese iphone called MEYZU M8, it has MT6235 CPU and I can not read flash to edit language.. hope you will add this new CPU type to both Chinese miracle and Langpack editor.
regards..
Action: read information
Model: Autodetect 6228-6230 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6235, E04
Hardware version: L009_08B_HW
Software version: L009_WIFI1_TV1_FM1_E
Software date: 2000.00.00
Barcode: L00909060500906 10
imei: 3561810xxxxxxxx
imei: 3561810xxxxxxxx
Finished, time used: 6 sec
Power off phone now !
COM4 [VCP1] selected
module v2.87
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: read NAND flash
read mode: 01
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
error: can't detect CPU id
Release Power button now !
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !
COM4 [VCP1] selected
module v2.87
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
error: can't detect CPU id
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !
InfinityHelp
07-30-2009, 22:56
hello!
we have 6235 phone will add support for this type of MCU nearest time
hello!
Ask for help that will aid in this infinity box 6235 mt??