View Full Version : help needed in sigmatel s88
p.rahulganesh
03-10-2009, 16:29
i formated sigmatel s88 with infinity now it shows not calibrated in screen and touch screen not responding i have used calibrate touchscreen option also but no sucses but i confirm that tochscreen is 100% ok in that any help urgent
jai sri ganesh
i formated sigmatel s88 with infinity now it shows not calibrated in screen and touch screen not responding i have used calibrate touchscreen option also but no sucses but i confirm that tochscreen is 100% ok in that any help urgent
jai sri ganesh
bro try to change calibrate touchscreen mode........1/2/4
InfinitySupport
03-11-2009, 00:15
i formated sigmatel s88 with infinity now it shows not calibrated in screen and touch screen not responding i have used calibrate touchscreen option also but no sucses but i confirm that tochscreen is 100% ok in that any help urgent
jai sri ganesh
Hello,
Did you tried to use different calibration modes ?
p.rahulganesh
03-11-2009, 11:38
sir i have tried all 5 modes but same complaint
jai sri ganesh
azeem781986
03-11-2009, 12:50
sir i have tried all 5 modes but same complaint
jai sri ganesh
hello friend just make safe format ffs then dont remove battry and power on now u will see callibrate touchscreen mode
power off fone and then callibrate with mode 2-3 will b done 100%
i hav tested many times
B.R
AZeeM :D
sunilmobile123
03-12-2009, 15:19
help needed in sigmatel s88
i formated sigmatel s88 with infinity now it shows not calibrated in screen and touch screen not responding i have used calibrate touchscreen option also but no sucses but i confirm that tochscreen is 100% ok in that any help
InfinityHelp
03-13-2009, 02:01
hello!
if touchscreen is 100% OK- just use pen anf touch needed points on LCD.
this will calibrate LCD
p.rahulganesh
03-13-2009, 08:15
dear infinityhelp it does not shows calibrate option it just shows not calibrated and if i try to tap the screen it remains hang on not calibrated plz help its urgent
jai sri ganesh
sunilmobile123
03-14-2009, 07:34
i have solutison for sigmatel s88 not calibrated my contact sunilmobile123@yahoo.co.in
InfinityHelp
03-15-2009, 00:11
i have solutison for sigmatel s88 not calibrated my contact sunilmobile123@yahoo.co.in
hello!
can you post your method here?
aikonmani
03-15-2009, 02:13
i have solutison for sigmatel s88 not calibrated my contact sunilmobile123@yahoo.co.in
why u hide ur knowledge? Did u think that your solution is one of the top secret?!
Kanwalgee
03-15-2009, 10:11
I have same problem on screen just show (Not Calibrated)no other thing i try all calibrated method flash phone with (SUNPLUS25_06B_PCB01_GPRS_MT6225_S00.C5707C_V01_10 _IL_OV_071211_MSA__S88_16m_En_Cn.B0M) but phone not power on just keypad light,s on.again flash with readed flash same back on .(Not Calibrated) here i upload readed flash from this phone aslo mail to support.
File: S88_Sigmatel_Touch_not_calibrated.rar
DownloadLink:
http://rapidshare.com/files/209424401/S88_Sigmatel_Touch_not_calibrated.rar
InfinityHelp
03-15-2009, 22:54
hello!
sorry, but i dont get: did you get your phone back to work? or it stays on "Calibration" ?
Kanwalgee
03-16-2009, 07:08
No sir After write backup on same condetion(Not calibrated) so i send flash to support for solve my problem.
InfinityHelp
03-16-2009, 23:13
hello!
ok, please write subject "Touchscreen calibration failed"
Kanwalgee
03-17-2009, 07:41
Sir can i mail again with this subject?
InfinityHelp
03-17-2009, 21:36
Sir can i mail again with this subject?
hello!
yes, please resend this email with subject which i mentioned
Kanwalgee
03-18-2009, 07:36
Malil send just now.
prime_master786
04-06-2009, 16:26
i formated sigmatel s88 with infinity now it shows not calibrated in screen and touch screen not responding i have used calibrate touchscreen option also but no sucses but i confirm that tochscreen is 100% ok in that any help urgent
jai sri ganesh
THIS IS A NEW MAIN SETUP PROBLEM. PLEASE USE PREVIOUS VERSION FOR THIS PURPOSES InfinitySetupMain_v2.14b. IT IS 100% TESTED BY ME. USE THIS ANN POST RESULT. WAITING REPLY
InfinitySupport
04-06-2009, 19:50
THIS IS A NEW MAIN SETUP PROBLEM. PLEASE USE PREVIOUS VERSION FOR THIS PURPOSES InfinitySetupMain_v2.14b. IT IS 100% TESTED BY ME. USE THIS ANN POST RESULT. WAITING REPLY
Hello,
Your advice is little bit wrong.
prime_master786
04-08-2009, 07:56
Hello,
Your advice is little bit wrong.
I REPAIRED ALL TOUCH SCREEN IN THIS WAY WHICH NEW VERSION FAILED TO DO:rolleyes:
BUT YOU UNDERSTAND BEST THAN MINE
somratjisan
04-14-2009, 14:34
Just write back your eeprom 100% ok
shuaib_kashish
05-01-2009, 10:00
see here....
http://forum.gsmhosting.com/vbb/showthread.php?t=706534
gulab_sam
08-23-2009, 12:11
just open the set and remove tuch screen paper,and format then cancle calibrated with infnity 100% solved ur peoblem
and before do this read full flash for ur back up
rakesh15
08-23-2009, 16:32
use old version of chinese miricle all latest version are failed
rakesh15
08-23-2009, 18:13
use chinese miricle 2.72 latest version cant able to bypass calibrate
rakesh15
08-23-2009, 18:15
use 2.71 chinese miriclelatest cant able to bypass CALIBRATE