mohammed ako
03-12-2009, 10:28
the update is good to some extent but there is the need to include more boot code, so far it connects fine with bootcode 820000 while it cannot connect with bootcode 820013 the operation log is as follows:
Pls infinity team I observed a little problem about ZTE A66 I successfully flashed and unlock
about 3 with pana01 v1.64 the log for one is below:
COM113 [VCP0] selected
module v1.64
Device: ZTE-A66
Checking data, wait...
Action: flash write
Boot ...
Press and HOLD Power button now !
e-gold: 820000
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
115200
Set Baud Done
Connecting ...
flash: 0001:22C4
Connecting Done
Check hardware ...
sw version: AIN-P108A17V1.0.0B01 15 48 16 ZAIN-P108A17B01-EnFr-NG01 g3dBV2.0
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-A66_eeprom-static_20090311-151935.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-A66_eeprom-security_20090311-151936.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-A66_eeprom-complete_20090311-151942.B1E.bin
backup critical area Done
Check memory ...
Check memory Done
Write ...
reset...
done
Erasing: Firmware
Writing: Firmware
Erasing: Firmware
Writing: Firmware
Write Done
Finished, time used: 248 sec
Remove/Install battery now !
but there is one I tried unlocking but it gives the following log
COM113 [VCP0] selected
module v1.64
Device: ZTE-A66
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820013
loading...
next part...
boot answer: 00
error: unknown bootcode answer:
Release Power button now
Boot Failed
Finished, time used: 6 sec
Remove/Install battery now !
I think there is still the need for Another update which will support e-gold:820013 and other higher bootcode if there is.
since all the successful ones are egold:820000
while this is egold:820013 thanks.
Pls infinity team I observed a little problem about ZTE A66 I successfully flashed and unlock
about 3 with pana01 v1.64 the log for one is below:
COM113 [VCP0] selected
module v1.64
Device: ZTE-A66
Checking data, wait...
Action: flash write
Boot ...
Press and HOLD Power button now !
e-gold: 820000
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
115200
Set Baud Done
Connecting ...
flash: 0001:22C4
Connecting Done
Check hardware ...
sw version: AIN-P108A17V1.0.0B01 15 48 16 ZAIN-P108A17B01-EnFr-NG01 g3dBV2.0
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-A66_eeprom-static_20090311-151935.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-A66_eeprom-security_20090311-151936.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-A66_eeprom-complete_20090311-151942.B1E.bin
backup critical area Done
Check memory ...
Check memory Done
Write ...
reset...
done
Erasing: Firmware
Writing: Firmware
Erasing: Firmware
Writing: Firmware
Write Done
Finished, time used: 248 sec
Remove/Install battery now !
but there is one I tried unlocking but it gives the following log
COM113 [VCP0] selected
module v1.64
Device: ZTE-A66
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820013
loading...
next part...
boot answer: 00
error: unknown bootcode answer:
Release Power button now
Boot Failed
Finished, time used: 6 sec
Remove/Install battery now !
I think there is still the need for Another update which will support e-gold:820013 and other higher bootcode if there is.
since all the successful ones are egold:820000
while this is egold:820013 thanks.