PDA

View Full Version : Spreadtrum SC6600D Pinout Info..Nboot..

LoveLess
03-28-2009, 18:45
hi all...

i need sc6600d pinout info.. how can i find nboot pin..? and will we use rj45 or usb..? i need more info.. and what is nboot pin..? i have rx and tx for sc6600d cpus but i havent nboot..so phone is not booting..
mosbah
03-28-2009, 20:14
hi
look this http://main.gsmhosting.com/?m=200809&paged=14
LoveLess
03-28-2009, 21:17
hi
look this http://main.gsmhosting.com/?m=200809&paged=14

thanx sir but there is no info in there... if u have any ifo about it pls share with us...

b.r.
mosbah
03-28-2009, 21:31
hi
connecteur 2x7 ?
mosbah
03-28-2009, 21:35
hi
this is the phone?
mosbah
03-28-2009, 21:41
hi
about this phone pinouts. you can use software for search (you need have spiderman box and usb pinfinder)
same use spiderman cable set. no need make usb cable
LoveLess
03-28-2009, 21:42
hi
connecteur 2x7 ?

hi
this is the phone?


thanx alot sir.. as far as i see there are 2 type phones..actually 3.. one of them is n99i double, it means d2000+ (it has 2x5 motorola socket) and the other one is Q528 phones (it has 2x7 socket) and the last is ur added phone, N82 ( it has 2x7 socket) i have all phones rx and tx pinout...i can change imei but not booting phone, for formatting or flashing..
tkowsar
03-29-2009, 07:41
thanx alot sir.. as far as i see there are 2 type phones..actually 3.. one of them is n99i double, it means d2000+ (it has 2x5 motorola socket) and the other one is Q528 phones (it has 2x7 socket) and the last is ur added phone, N82 ( it has 2x7 socket) i have all phones rx and tx pinout...i can change imei but not booting phone, for formatting or flashing..



sometimes nBoot pin have on pcb written. but if you want a full and final solution, you need to buy a china device with pin finder.
LoveLess
03-29-2009, 14:14
sometimes nBoot pin have on pcb written. but if you want a full and final solution, you need to buy a china device with pin finder.

i see sir.. and finally cant i format the phone or flashing w\o box..?
tkowsar
03-29-2009, 15:51
i see sir.. and finally cant i format the phone or flashing w\o box..?


bro, if you have no box, only single usb to com cable, now where you connect you phone nBoot pin in a ordinary usb to com cable? there have only tx rx vcc gnd, yes?

but its true, i seen some of old spd6600d phone, which is working sometimes with only tx rx from cable and power from batt.

now you can try.