ChineseMiracle v2.79 Detect New Firmware and can't read phone code

[Star75]

New problem in Chinese phones

ChineseMiracle v2.79 Detect New Firmware and can't read phone code and after safe,complete format phone power on with some word chinese and hang(I think it's "illigal software")

Please check for update...thanks

Sigmatel W999 (1 CPU Active 2SIM)

MCU :6225
Flash:Toshiba TV00578002DABD

http://images.okazii.ro/auctions/2008/11/03/15109308-1-500_500.jpg

COM5 [VCP7] selected
module v2.79
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:CF03:0009
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #02 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #03 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.79, database date: 24.03.2009):
A200_PCB01_GPRS_MT6225_S00.V02_ENFRARRUPEVI_ALX.BI N

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: A200_PCB01_GPRS_MT6225_S00.V02_ENFRARRUPEVI_ALX.BI N
ver. sw 2: A200.V02.EnFrArRuPeVi.ALX, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: flash[A200_PCB01_GPRS_MT6225_S00.V02_ENFRARRUPEVI_ALX.BI N]...
file saved: E:\Infinity Box\ChineseMiracle\flash[A200_PCB01_GPRS_MT6225_S00.V02_ENFRARRUPEVI_ALX.BI N]_20090328-143731.B0M.bin
Finished, time used: 816 sec
Remove/Install battery now !

Can't read phone code

COM5 [VCP7] selected
module v2.79
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:CF03:0009
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: A200.V02.EnFrArRuPeVi.ALX
Version: Eidolon_GEMINI_HW_V3.0
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35688800097052
connection Ok
detecting structure #1...
1 5 8 9 10 12 13 14 16 20 23 24 25 27 28 29error: detection failed (16 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 21 sec
Remove/Install battery now !

Firmware download here (http://www.4shared.com/file/95590790/95dde8f7/New_Firmware.html)

[Faisal_Computer]

post screen picture ,,,,, what its saying
Br
Faisal_Computer

[InfinitySupport]

@Star75
1. restore original eeprom (or full flash)
2. try to read code with this software: http://www.infinity-box.com/download/public/InfinityUpdate_ChineseMiracle_v2.80_test.rar

waiting for your results

[Star75]

@Star75
1. restore original eeprom (or full flash)
2. try to read code with this software: http://www.infinity-box.com/download/public/InfinityUpdate_ChineseMiracle_v2.80_test.rar

waiting for your results

Thanks for fast support reply:)


This problem was solve by restore backup full flash with phone code,my custormer can't wait, i will call him back for test new software update:)


Infinity allway good update

BR
Star75

[Star75]

With ChineseMiracle v2.80 Can't read phone code


COM5 [VCP7] selected
module v2.80
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:CF03:0009
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: A200.V02.EnFrArRuViPeTuSpPo.ALX
Version: Eidolon_GEMINI_HW_V3.0
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35688800097052
connection Ok
detecting structure #1...
1 5 8 9 10 12 13 14 16 20 23 24 25 27 28 29error: detection failed (16 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 17 sec
Remove/Install battery now !

[InfinitySupport]

Hello,

yes, my fault.
Please, if you can, try this software: http://www.infinity-box.com/download/public/InfinityUpdate_ChineseMiracle_v2.80_test2.rar

[Star75]

Hello,

yes, my fault.
Please, if you can, try this software: http://www.infinity-box.com/download/public/InfinityUpdate_ChineseMiracle_v2.80_test2.rar

Sorry i can't test with old phone,i test other same phone but new version 04 and working

Old phone ver:

A200_PCB01_GPRS_MT6225_S00.V02_ENFRARRUPEVI_ALX.BI N

New same phone ver:

A200_PCB01_GPRS_MT6225_S00.V04_ENFRARRUSPPTPEVTIGR _ALX.BIN


Read code

COM5 [VCP7] selected
module v2.80
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C303:0000
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: A200.V04.EnFrArRuSpPtPeVTIGr.ALX
Version: Eidolon_GEMINI_HW_V3.0
detecting structure #2...
5warning: wrong packet cs
11 done
67 byte(s) read
imei: 3568880009705
connection Ok
detecting structure #1...
1 5 8 9 10 12 13 14 done
178 byte(s) read
reading data #2...
Phone lock: On
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 2698
Finished, time used: 22 sec
Remove/Install battery now !

Complete format and phone working

COM5 [VCP7] selected
module v2.80
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C303:0000
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #02 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #03 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.80, database date: 28.03.2009):
A200_PCB01_GPRS_MT6225_S00.V04_ENFRARRUSPPTPEVTIGR _ALX.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: A200_PCB01_GPRS_MT6225_S00.V04_ENFRARRUSPPTPEVTIGR _ALX.BIN
ver. sw 2: A200.V04.EnFrArRuSpPtPeVTIGr.ALX, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
detecting languages...
........................................
language parameters detected
detected languages: En Ru Gr Fr Es Id Vn Tr Farsi Pt Ar
Check firmware content Done
Backup required data ...
flash: 98004900000002:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98004900000002:18E59F00000000
Finalization Done
Finished, time used: 65 sec

[Star75]

I will find phone old version and test A200_PCB01_GPRS_MT6225_S00.V02_ENFRARRUPEVI_ALX



Thanks

B.R

[bavesore]

i think i face same problem with sgmatel after complete format
the phone start up with chines word i dont know what it is i try
the flash from support :A200_PCB01_GPRS_MT6225_S00.V02_ENFRARRUPEVI_ALX.
but same result ,
could you mr star75 tell me where i find new ver :
A200_PCB01_GPRS_MT6225_S00.V04_ENFRARRUSPPTPEVTIGR _ALX
thanks in advance