how to open phone lock code of china mobiles with infinity

[haydernaz]

plz tell me how to open phone lock code of china mobiles with infinity i try user lock code with all methode but same problem
i also sp unlock & complet formate

[segun4u]

plz tell me how to open phone lock code of china mobiles with infinity i try user lock code with all methode but same problem
i also sp unlock & complet formate
man u can post ur log to know ur problem but 4 me complete format remove phone code

[venuno]

format then change imei...

[haydernaz]

man u can post ur log to know ur problem but 4 me complete format remove phone codeCOM11 [Serial2] selected
module v2.76
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:6097:043E
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #02 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #03 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.2391D6CD.[M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN_F5C35E72].rpl
====================
New firmware detected (v.2.76, database date: 01.02.2009):
M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 2391D6CD
identification#1 protocol ver: 04
ver. sw 1: M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN
ver. sw 2: M858dfxsp_6226b_MULTI_11H, 8DA13C0A
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98004900000002:2AEA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN]...
warning: wrong data size at 0x00F23C00, retry...
warning: wrong cs at 0x00F23C00, retry...
read error recovered
warning: wrong data size at 0x00FD8C00, retry...
warning: wrong cs at 0x00FD8C00, retry...
read error recovered
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN]_20060101-045348.B0E.bin
flash: 98004900000002:2AEA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98004900000002:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_2391D6CD_M858DFXSP_MULTI_PCB01_GPRS_MT62 26_S01.M858DFXSP_6226B_MULTI_11H.BIN_F5C35E72_2006 0101-045728.B0X.bin
Finished, time used: 296 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[hima010]

thanksssssssssssssssssssssssssssss

[sman234]

COM11 [Serial2] selected
module v2.76
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:6097:043E
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #02 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #03 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.2391D6CD.[M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN_F5C35E72].rpl
====================
New firmware detected (v.2.76, database date: 01.02.2009):
M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 2391D6CD
identification#1 protocol ver: 04
ver. sw 1: M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN
ver. sw 2: M858dfxsp_6226b_MULTI_11H, 8DA13C0A
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98004900000002:2AEA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN]...
warning: wrong data size at 0x00F23C00, retry...
warning: wrong cs at 0x00F23C00, retry...
read error recovered
warning: wrong data size at 0x00FD8C00, retry...
warning: wrong cs at 0x00FD8C00, retry...
read error recovered
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN]_20060101-045348.B0E.bin
flash: 98004900000002:2AEA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98004900000002:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_2391D6CD_M858DFXSP_MULTI_PCB01_GPRS_MT62 26_S01.M858DFXSP_6226B_MULTI_11H.BIN_F5C35E72_2006 0101-045728.B0X.bin
Finished, time used: 296 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

sir;
please upload eeprom backup "C:\Program Files\InfinityBox\ChineseMiracle\eeprom[M858DFXSP_MULTI_PCB01_GPRS_MT6226_S01.M858DFXSP_62 26B_MULTI_11H.BIN]_20060101-045348.B0E.bin
"