1 new firmware (Vertu Ascent TI Ferrari)

[domestik]

connector 2x5
cpu: 6225
flash 32 Mb.

here is the log:
==== log: [04.04.2009 13:36:32] ====
COM16 [VCP2] selected
module v2.79
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:5603:0008
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
detecting chip #01 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
detecting chip #01 in region #00...
flash: 01227E223C2200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 02000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.79, database date: 28.03.2009):
YT25_T9_PCB01_GPRS_MT6225_S00.V501_02.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: YT25_T9_PCB01_GPRS_MT6225_S00.V501_02.BIN
ver. sw 2: V501.02, 00000000
ffs offset/size: 01C00000/00400000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 01C00000
flash: 01227E223C2200:29EA0000000000
checking area [00000000]: 00000000-01FFFFFF...
ffs/eeprom found near: 01E00000
Detected ffs/eeprom address is non-standard: 01E00000

Posible reasons:
1. ffs/eeprom is Ok but address is non-standard
2. ffs/eeprom is damaged and can't be detected
3. ffs/eeprom is Ok but detected incorrectly (f.e. unknown ffs/eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make full flash backup for emergency case
3. repeat required operation

Are you sure that detected ffs/eeprom address is correct ?
autodetected ffs/eeprom address confirmed by user: 01E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:01E00000-01FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: flash[YT25_T9_PCB01_GPRS_MT6225_S00.V501_02.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\flash[YT25_T9_PCB01_GPRS_MT6225_S00.V501_02.BIN]_20090404-135813.B0M.bin
Finished, time used: 1310 sec
Remove/Install battery now !

here is fullflash:
http://rapidshare.com/files/217380754/flash_YT25_T9_PCB01_GPRS_MT6225_S00.V501_02.BIN__2 0090404-135813.B0M.bin

[InfinityHelp]

hello!

thank you for sharing with us this firmware.
it will be processed and uploaded to support

[domestik]

Maybe create one special sticked thread with only new firmwares links?

[InfinityHelp]

hello!

program is giving advice what to do with New firmwares.
they must be sent to mt62xx@gmail.com