Hello Infinity Team help me plz..........

[abid dar]

I have two Lobster model 544 . I try to unlock with infinity box the box show the full unlock but the set not unlock. same problem with another set . plz tell me what i do...............

COM5 [VCP0] selected
module v2.69
Device: Lobster-544
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard fast
Unlock procedure can be faster if you skip ffs/eeprom area backup procedure.
Do you want to disable ffs/eeprom backup ?
ffs/eeprom backup disabled
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6219:8A01]...
CPU: MT6219
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: B0001D00000000:B0001D00000000
flash: Sharp Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
..............................................
detect device identification#1 finished
identification#1 protocol ver: 01
ver. sw 1: MP500_UK_PCB01_GPRS_MT6219_EV.MP500_W05_20_MP_V53. BIN
ver. sw 2: MP500.W05.20.MP.V53, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
flash: B0001D00000000:B0001D00000000
Backup required data Done
Patch required data ...
................
lock area found
Patch required data Done
Special operation ...
Special operation Done
Write ...
flash: B0001D00000000:B0001D00000000
flash: B0001D00000000:B0001D00000000
Write: lock-area-1
Write Done
Finalization ...
Finalization Done
Finished, time used: 59 sec
Remove/Install battery now !

ok infinity team

[InfinitySupport]

Hello,

Did you tried to use another unlock method ?
Try to use another unlock method or try to read unlock codes.

[abid dar]

i try all methot butt same error i when i enter the np code second setp master code when i enter the master code so (wrong master code ) show..........so what i do tell me infinity team..

[InfinitySupport]

Hello,

Did you tried to make unlock with "smart fast" method ?

If problem still exist read full flash from phone and send it to support@infinity-box.biz

[abid dar]

i upload file here infinity team chack here

http://rapidshare.com/files/219260952/flash_MP500_UK_PCB01_GPRS_MT6219_EV.MP500_W05_20_M P_V53.BIN__part_1_of_1_20090408-172850.9AX.bin.html

[abid dar]

infinity team when i enter NP code so ok butt second setp it sp code its so long so u tell me who i enter it in set....


NP code: 03405684/30046548
locked to: 234-30
SP code: 0000000000003344/0000000000003344
CP code: FFFFFFFFFFFF0000/FFFFFFFFFFFF0000
IMSI code: 4040104768060000/0404017486600000
Phone code: 0000000000000000
Finished, time used: 20 sec
Remove/Install battery now !

[InfinitySupport]

Hello,

Please, try to read codes again with this new software: http://www.infinity-box.com/download/public/InfinityUpdate_MModule_v2.70.rar

Waiting for your results !

[chandrau_1989]

I have two Lobster model 544 . I try to unlock with infinity box the box show the full unlock but the set not unlock. same problem with another set . plz tell me what i do...............

COM5 [VCP0] selected
module v2.69
Device: Lobster-544
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard fast
Unlock procedure can be faster if you skip ffs/eeprom area backup procedure.
Do you want to disable ffs/eeprom backup ?
ffs/eeprom backup disabled
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6219:8A01]...
CPU: MT6219
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: B0001D00000000:B0001D00000000
flash: Sharp Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
..............................................
detect device identification#1 finished
identification#1 protocol ver: 01
ver. sw 1: MP500_UK_PCB01_GPRS_MT6219_EV.MP500_W05_20_MP_V53. BIN
ver. sw 2: MP500.W05.20.MP.V53, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
flash: B0001D00000000:B0001D00000000
Backup required data Done
Patch required data ...
................
lock area found
Patch required data Done
Special operation ...
Special operation Done
Write ...
flash: B0001D00000000:B0001D00000000
flash: B0001D00000000:B0001D00000000
Write: lock-area-1
Write Done
Finalization ...
Finalization Done
Finished, time used: 59 sec
Remove/Install battery now !

ok infinity team


brother try to format ffs and then unlock.....................

best up lock ............all the best ...........

[InfinitySupport]

I think that with latest MModule everything should be Ok.
Let's wait results from thread starter.

[abid dar]

I have been unlock Lobster 544 with latest version.

Show here .................


SET NO 1..............

COM5 [VCP0] selected
module v2.70
Action: read codes
unlock method: read codes
Model: Lobster-544
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6219:8A01]...
CPU: MT6219
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6219,E01
Date: 2004.06.18
Version: 1.2.1.4
Version: MP500.W05.20.MP.V53
Version: VerH/W:0.1
65 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
69 byte(s) read
Phone lock: Off
Network lock: On
Network subset lock: Off
Service provider lock: On
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
NP code: 89829610/98286901
locked to: 234-30
NP of SP: 234-30
SP code: 94506405/49054650
Phone code: 0000
Finished, time used: 19 sec
Remove/Install battery now !


SET NO 2..............

COM5 [VCP0] selected
module v2.70
Action: read codes
unlock method: read codes
Model: Lobster-544
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6219:8A01]...
CPU: MT6219
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6219,E01
Date: 2004.06.18
Version: 1.2.1.4
Version: MP500.W05.20.MP.V53
Version: VerH/W:0.1
65 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
69 byte(s) read
Phone lock: Off
Network lock: On
Network subset lock: Off
Service provider lock: On
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
NP code: 89829610/98286901
locked to: 234-30
NP of SP: 234-30
SP code: 94506405/49054650
Phone code: 0000
Finished, time used: 17 sec
Remove/Install battery now !

very very thanks full 2 you........