.:::::unlock zte 125 with infinity box:::::.

[harkishan singh]

here is log:
COM2 [VCP0] selected
module v1.60
Device: ZTE-125
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
115200
Set Baud Done
Connecting ...
flash: 0001:22C4
Connecting Done
Check hardware ...
sw version: -DE-P108A1V1.0.0B02 VDF-P108A1B07-De-DE03 g3dBV2.0 16 59 13 04.1
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-static_20090409-105600.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-security_20090409-105601.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-complete_20090409-105607.B1E.bin
reading additional data...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_lock-area_20090409-105626.B1E.bin
backup critical area Done
Check memory ...
lock found
Check memory Done
Write ...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, time used: 117 sec
Remove/Install battery now !

br:
Harkishan

[mobilee_fun]

its old story bro.read before post

[kalpeshoza]

its old story bro.read before post


n/p we know is old but is help full for some other new user :mad: any way Thanks to harkishan singh for test repot

[InfinitySupport]

here is log:
COM2 [VCP0] selected
module v1.60
Device: ZTE-125
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
115200
Set Baud Done
Connecting ...
flash: 0001:22C4
Connecting Done
Check hardware ...
sw version: -DE-P108A1V1.0.0B02 VDF-P108A1B07-De-DE03 g3dBV2.0 16 59 13 04.1
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-static_20090409-105600.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-security_20090409-105601.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_eeprom-complete_20090409-105607.B1E.bin
reading additional data...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-125_lock-area_20090409-105626.B1E.bin
backup critical area Done
Check memory ...
lock found
Check memory Done
Write ...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, time used: 117 sec
Remove/Install battery now !

br:
Harkishan




Thank you very much for test report !
Each test report with attached logs is very important for us
so we can see how is Infinity-Box software works, what is phone hardware configuration (f.e. flash chip type)
and what is possible problems (so we will be able to fix it) and successfully done work.