vodafone 225 flashing error

[amit_varietymob]

Vodafone 225 without fm i was trying to unlock but after unlock it was not done. Then when i try to flash the phone with support files by the time of flashing it is only flashing main file & while flashing second file lp it fails . Set is dead now.Please help infinity team. Here is a log:
COM6 [VCP0] selected
module v1.60
Device: ZTE-225
Checking data, wait...
Action: flash write
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
115200
Set Baud Done
Connecting ...
flash: 00BF:7353
Connecting Done
Check hardware ...
sw version: -TU-P108A2V1.0.0B03 VDF-P108A2B06-Tu-TU02 g3dBV2.0 7
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-225_eeprom-static_20090409-164346.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-225_eeprom-security_20090409-164347.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\ZTE-225_eeprom-complete_20090409-164354.B1E.bin
backup critical area Done
Check memory ...
unlocking...
lock found
operation done
Check memory Done
Write ...
reset...
done
Erasing: Firmware
Writing: Firmware
Erasing: Language Pack
error: erase failed: 00650000
Write Failed
Finished, time used: 231 sec
Remove/Install battery now
I flash the phone with this files:
-ZTE-225_Main_VDF-P108A2B06-Tu-TU02_g3dBV2.0_Jun-5-2007.B1M.bin
-ZTE-225_LP_VDF-P108A2B06-Tu-TU02_g3dBV2.0_Jun-5-2007_Tr.B1P.bin
-ZTE-225_repair_ffs_01.B1F.bin
-ZTE-225_repair_eeprom_complete_01.B1E.bin
Please help .

[InfinitySupport]

Hello,

Try to select model BSNL-200 and flash phone again with ZTE-225 files.
Waiting for your results.

[amit_varietymob]

Hello,

Try to select model BSNL-200 and flash phone again with ZTE-225 files.
Waiting for your results.
sir it's 225 normal if i select bsnl-200 how can i will able to flash lp as lp is not highlighted? Between is it ok to flash with 225fm files to 225 normal?

[InfinitySupport]

Hello,

You can try to use ZTE-225 file that contain firmware+lp in one file, f.e. this file: ZTE-225_main_lp_VDF-P108A2B07-Pt-PT04_Sep-22-2008.B1M.bin

[amit_varietymob]

Problem solved. When i flash with only firmware above (ZTE-225_main_lp_VDF-P108A2B07-Pt-PT04_Sep-22-2008.B1M.bin ), handset was still dead. Then i flash it with all three files including ffs , eeprom on ticking unlock during flash & reset setting handset is alive & unlocked. Files i use are as below:
TE-225_main_lp_VDF-P108A2B07-Pt-PT04_Sep-22-2008.B1M.bin
ZTE-225_repair_ffs_01.B1F.bin
-ZTE-225_repair_eeprom_complete_01.B1E.bin
Here is a log:
COM6 [VCP0] selected
module v1.60
Device: Digibee-BSNL-G200CF
Checking data, wait...
Action: flash write
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
115200
Set Baud Done
Connecting ...
flash: 00BF:7353
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\Digibee-BSNL-G200CF_eeprom-static_20090410-190102.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\Digibee-BSNL-G200CF_eeprom-security_20090410-190103.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\Digibee-BSNL-G200CF_eeprom-complete_20090410-190110.B1E.bin
backup critical area Done
Check memory ...
unlocking...
lock found
operation done
Check memory Done
Write ...
reset...
done
Erasing: Firmware
Writing: Firmware
Erasing: Firmware
Writing: Firmware
Erasing: FFS-2/File system
Writing: FFS-2/File system
Erasing: Eeprom
Writing: Eeprom
Write Done
Finished, time used: 449 sec
Remove/Install battery now !
Thanks much infinity support.