Micromax new model x511 prob

[mov009]

MICROMAX NEW MODEL X511 DETECTED BY PINFINDER

HEAR IS PINOUT

CPU: MT6229
result: Rx:14 Tx:13
saved: micromax_x511



BUT SOME PROB SHOW ,WHEN I FORMAT THE SET IN SAFE MODE:

LOG:-
COM2 [VCP0] selected
module v2.81
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6229:8A02:8A02]...
CPU: MT6229
high speed boot On
chip: 0031:2005:0101
status: FF
rom: 4D5710FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6229,E02
Date: 2005.07.11
Version: 1.0
Version: 077262_970_V1847
Version: TIANYU29_07A_PMJ_HW
detecting structure #2...
13 27error: detection failed (2 tries), read flash and send to support
connection Ok
building list...
done
items to clear: 256
warning: wrong packet cs
warning: wrong packet cs
items cleared: 256 of 256
building list...
done
items remains: 0
Finished, time used: 65 sec
Remove/Install battery now !

[InfinitySupport]

MICROMAX NEW MODEL X511 DETECTED BY PINFINDER

HEAR IS PINOUT

CPU: MT6229
result: Rx:14 Tx:13
saved: micromax_x511



BUT SOME PROB SHOW ,WHEN I FORMAT THE SET IN SAFE MODE:

LOG:-
COM2 [VCP0] selected
module v2.81
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6229:8A02:8A02]...
CPU: MT6229
high speed boot On
chip: 0031:2005:0101
status: FF
rom: 4D5710FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6229,E02
Date: 2005.07.11
Version: 1.0
Version: 077262_970_V1847
Version: TIANYU29_07A_PMJ_HW
detecting structure #2...
13 27error: detection failed (2 tries), read flash and send to support
connection Ok
building list...
done
items to clear: 256
warning: wrong packet cs
warning: wrong packet cs
items cleared: 256 of 256
building list...
done
items remains: 0
Finished, time used: 65 sec
Remove/Install battery now !





Hello,

E-mail to send files is: support@infinity-box.biz
Also you can upload files to rapidshare.com and send to us links.

Thank you !

[zakiyyboss]

MICROMAX NEW MODEL X511 DETECTED BY PINFINDER

HEAR IS PINOUT

CPU: MT6229
result: Rx:14 Tx:13
saved: micromax_x511



BUT SOME PROB SHOW ,WHEN I FORMAT THE SET IN SAFE MODE:

LOG:-
COM2 [VCP0] selected
module v2.81
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6229:8A02:8A02]...
CPU: MT6229
high speed boot On
chip: 0031:2005:0101
status: FF
rom: 4D5710FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6229,E02
Date: 2005.07.11
Version: 1.0
Version: 077262_970_V1847
Version: TIANYU29_07A_PMJ_HW
detecting structure #2...
13 27error: detection failed (2 tries), read flash and send to support
connection Ok
building list...
done
items to clear: 256
warning: wrong packet cs
warning: wrong packet cs
items cleared: 256 of 256
building list...
done
items remains: 0
Finished, time used: 65 sec
Remove/Install battery now !



what is the PINFINDER cable are you using? Can be explained me because for me any cable is not entering the socket!!

[InfinitySupport]

Hello,

What is your phone bottom connector type ?
How many pins ?