********* Big problem of XKSSTEL china phone*******

[rashel.com]

********* Big problem of XKSSTEL china phone*******


I have lot of XKSSTEL same problem format after dead

i am try to flash but same problem

File info : UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924.BIN




please help infinity team.

[rashel.com]

picture here...................

[InfinityHelp]

hello!

try to write both files:
[bin] flashfiles/ChineseMiracle/_MT6225/eeprom/UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924__ffs_017.B0E.bin
[bin] flashfiles/ChineseMiracle/_MT6225/UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924__XKSSTEL-S4_16m_En_Ru_Fr_Es_Id_Th_Vn_Tr_Farsi_Pt_Ar.B0M.bin

and make sure battery voltage is OK

[rashel.com]

hello!

try to write both files:
[bin] flashfiles/ChineseMiracle/_MT6225/eeprom/UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924__ffs_017.B0E.bin
[bin] flashfiles/ChineseMiracle/_MT6225/UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924__XKSSTEL-S4_16m_En_Ru_Fr_Es_Id_Th_Vn_Tr_Farsi_Pt_Ar.B0M.bin

and make sure battery voltage is OK




i am allrady try to flash & eeprom .


but same problem dead

[rashel.com]

COM11 [VCP0] selected
module v2.81
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
skip: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:3403:0008
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924.BIN
ver. sw 2: X_S3_4524_V1.8_0924, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\UNISTAR25_GEMINI_ PCB01_GPRS_MT6225_S00.X_S3_4524_V1_8_0924__ffs_200 90428-155434.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Area: Eeprom/ffs
flash: EC257E25082501:18E59F00000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 145 sec
Remove/Install battery now !

[InfinityHelp]

hello!

i can see only one reason for this: our support area file is damaged.
sometimes poeple send us flash files from dead phones.

can you find same working phone with firmware
UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_4524_V 1_8_0924
?

[ahmedzameer]

XKSSTEL-S2
Need Falash File

UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_TOSHIB A_V1_7_0922__flash_.B0M
UNISTAR25_GEMINI_PCB01_GPRS_MT6225_S00.X_S3_TOSHIB A_V1_7_0922__ffs_.B0E

thanks