calibrate problem please help me

[MALIKtelecom]

COM8 [VCP0] selected
module v2.81
Action: touchscreen calibration
mode: 5
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:F803:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: EI_E245-3808S_02.10_311010
Version: HW_LCD_ST7787_OV7670
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-5)...
1 3 4 6 8 9error:
detection failed (6 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 14 sec
Remove/Install battery now !

i use old or new setup but problem not solve
i use mode 1 2 3 4 5 but not
any idea

[tkowsar]

flash your phone with good flash file but don't format after flash

2nd you can change your touch screen and do calibration by pen.

[MALIKtelecom]

thanx for reply
if i change touch screen i do not post here
bro please give other solution
or give flash file
thanx in advance

[dvd_anwar]

thanx for reply
if i change touch screen i do not post here
bro please give other solution
or give flash file
thanx in advance


before format then touchscreen calibration.not ok full flash original flash file

Post ur phone orignall flash file version.

[MALIKtelecom]

[QUOTE=dvd_anwar;4399019]before format then touchscreen calibration.not ok full flash original flash file

Post ur phone orignall flash file version




COM8 [VCP0] selected
module v2.81
Action: touchscreen calibration
mode: 5
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:F803:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: EI_E245-3808S_02.10_311010
Version: HW_LCD_ST7787_OV7670
detecting structure #2...