PDA

View Full Version : want nokia 5330 china pinout


adeelsaeed60
05-01-2009, 17:24
here is set pic
nokia 5330 express music

http://i.gsmarena.com/vv/newsimg/08/11/nokia-announcement/thumb/gsmarena_009.jpg

i want this set pinouts

zinoubinabil
05-01-2009, 18:16
check this link: "Chinese Miracle" pinouts and FAQ (Frequently Asked Questions) (http://forum.gsmhosting.com/vbb/showthread.php?t=476373)

InfinityHelp
05-03-2009, 00:11
hello!

start from looking to infinity pinout folder.
continue with search option in this forum.

if both places will give zero result- post connector type

adeelsaeed60
05-03-2009, 13:47
but i can't find any way thx for reply

InfinityHelp
05-05-2009, 17:53
hello!

and what is connector type?

ahmadge
05-18-2009, 05:32
12 pin jack 6x6
{ahmadge}

InfinityHelp
05-18-2009, 19:46
12 pin jack 2x6
{ahmadge}

hello!

lets start from checking what CPU it is based.
you either can do this by disassembling phone or by typing *#0044# and pressing green (send) button.
if you will see "language set: english"- you can be sure, that this phone is supported by Infintiy software.
if it does supported- i can teach you how to find pinout by measuring voltage on phone system connector pins

ahmadge
05-19-2009, 06:50
ok
cpu mtk6225a
{ahmadge}

InfinityHelp
05-19-2009, 21:47
hello!

if you dont have pinfinder - i can teach you how to find pinout by measuring voltage on system connector pins

Mr. Right
06-09-2009, 12:33
hello!

if you dont have pinfinder - i can teach you how to find pinout by measuring voltage on system connector pins


Sir kindly teach how to find rx tx by mesuring voltage on system connector pins

InfinityHelp
06-11-2009, 21:46
hello!

1. set multimeter to voltage measuring.
2. check bettery voltage, it should be more than 3,7volts
3. set one multimeter probe to some grounded phone part
(if you cant find grounded part outside phone- you need to take out small thin wire from negative battery terminal)
4. with second probe touch one by one all phone pins (phone battery attached)
(to get better result i would advice to set needle on the end of second probe)

memorise pins with voltage between 2,7-2,9volts.
those are tx/rx

gsm-world
10-31-2009, 09:04
here is diagram .tested by me.

http://forum.gsmhosting.com/vbb/showthread.php?p=4987215#post4987215