View Full Version : calibrate tutch screen 100% ok
nazmul hossain
05-03-2009, 10:37
COM3 [VCP0] selected
module v2.81
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:BC03:3FAE
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: DIJING_ILI9320_OV7660_MIR_BR26_05.27
Version: BR26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 done
204 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 15 sec
Remove/Install battery now !
thankss infinity team
nazmul hossain
biochemistali
05-03-2009, 10:49
nice to see log.
but it should be posted in sticky threzd
http://forum.gsmhosting.com/vbb/showthread.php?t=541620
samirov-gsm
05-03-2009, 11:02
good work..........
thankss infinity team
Hey,
I don't really know what is wrong with my ininity and pinfinder.
I never succeded to calibrate touchscreen of any chinesse phone . never pass this level...
COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...
and at the end ........
COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 82 sec
Remove/Install battery now !
Can anyone help me ?????///
cel_phon
05-23-2009, 15:17
No doubt infinity is the best device for china mobiles
Hey,
I don't really know what is wrong with my ininity and pinfinder.
I never succeded to calibrate touchscreen of any chinesse phone . never pass this level...
COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...
and at the end ........
COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 82 sec
Remove/Install battery now !
Can anyone help me ?????///
Press and HOLD Power button now !
Umair Rashid
05-23-2009, 16:16
try 5 modes one by one.
InfinityHelp
05-23-2009, 21:26
hello!
have you modified your Infinity box for better work with Pinfinder?
there must be Diode shorted. This will dramaticly increase output power.
Missing this power can be reason of mentioned above behavior
sravankumar2009
05-23-2009, 21:37
COM3 [VCP0] selected
module v2.81
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:BC03:3FAE
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: DIJING_ILI9320_OV7660_MIR_BR26_05.27
Version: BR26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 done
204 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 15 sec
Remove/Install battery now !
thankss infinity team
nazmul hossain
my dear frind i have the s88 model not calibrated show the log the after touchscreen calibration is ok but after same log show pls hlp me
mahmoudseha
05-23-2009, 21:51
Hey,
I don't really know what is wrong with my ininity and pinfinder.
I never succeded to calibrate touchscreen of any chinesse phone . never pass this level...
COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...
and at the end ........
COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 82 sec
Remove/Install battery now !
Can anyone help me ?????///
please help it's the same to me i can't celebrate any phone
help Infinity help
InfinityHelp
05-23-2009, 21:55
please help it's the same to me i can't celebrate any phone
help Infinity help
hello!
post your logs please
biochemistali
05-24-2009, 04:24
hello!
have you modified your Infinity box for better work with Pinfinder?
there must be Diode shorted. This will dramaticly increase output power.
Missing this power can be reason of mentioned above behavior
i need to know what diode is to be shorted, please uploada picture for demo.
farihabest
05-24-2009, 04:39
thanks....but I daily removes celebration screen problem with infinity of many sets... with version 8.2
InfinityHelp
05-24-2009, 21:30
i need to know what diode is to be shorted, please uploada picture for demo.
hello!
this information (with pictures) is available in Pinfinder User Manual
http://www.infinity-box.biz/download/public/Infinity-Box_PinFinder.pdf
albert maren
05-24-2009, 21:51
hello!
this information (with pictures) is available in Pinfinder User Manual
http://www.infinity-box.biz/download/public/Infinity-Box_PinFinder.pdf
no picture there just blank white please reload.
InfinityHelp
05-24-2009, 21:54
hello!
here is one picture: http://forum.gsmhosting.com/vbb/showpost.php?p=4498218&postcount=4
also, pinfinder user manual is stored on your HDD
hello!
here is one picture: http://forum.gsmhosting.com/vbb/showpost.php?p=4498218&postcount=4
also, pinfinder user manual is stored on your HDD
Wahooooooo, I have done the modification and for the first time, i have calbratite succefully a touchscreen of a chinesse phone with my own infinity and pinfinder...... BIG THANKS INFINITYHELP
COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:8806:FB29
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: N618.1
Version: N618_HW
detecting structure #2...
done
60 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 done
204 byte(s) read
nazmul hossain
05-25-2009, 18:00
please help it's the same to me i can't celebrate any phone
help Infinity help
bro,try mode1-5 one by one then check