Repair "EEprom Damaged" solution

[Drug_Store]

I can correct
C/S/M35
C/S/Me45
SL4x

EEprom damaged...

Sent me log, or just phone ID and IMEI (15 numbers). And I´ll correct *.lc file, and sent you, then you just need to upload it with correct (log calculation upload) SL45_lcu.exe CSM35_lcu.exe and CSM45_lcu.exe.

Sent your phone info to my mail, and wait...
drug_store@iol.pt

I´ll make it for free, of course.

[ritzthom]

Hello,

with which Tool or program do you correct the LC ?

It is the LC Corrector by www.gsmlab.com ?

Please reply

Thanks in advance.

[bop_gsm]

wrong section!!!

[bop_gsm]

Moved from Siemens Sl4x

[bop_gsm]

This solution for Siemens CMS35/A3X/SL45/C45 (not for SME45) with damaged EEPROM.


If Siemens IMEI Writer has produced an error "EEPROM damaged", it is necessary for you:

1. Take any working map-file for LC Uploader, for ex. SL45_45BD75D1.lc for SL45 or CSME45_2BDA1FCA.lc for C45.

2. Now edit this file in hexeditor:

0008-000B - change 4 bytes to PhoneID your phone (0009-000C in ldb-file).

3. Start *_lcu.exe, select an option "Write Def. EEP", load corrected *.lc and press Init Mobile.
Default eeprom it is written in the phone!

4. Now it is necessary to write the working map in the phone with Siemens IMEI Writer.

;)

[Drug_Store]

@Bop_gsm

About posting wrong section:
http://forum.gsmhosting.com/vbb/showthread.php?s=&threadid=74590

About Lc.
I´m not sure about S and ME but I´m pretty sure that´s possible

And yes, you can make that way.

but how about no need to map?

I can put eeprom 100% working just uploading lc. No need to map, because the IMEI...

Oh, and btw, your method I think only works on phones capable of reading log and map. My method also applies on phones that are unable to read logs and create maps.

@ritzhom

No I don´t use that.

[AnToS]

Hi,

i have a M50 with eeprom damaged. can you help me ?


Thanks..


bye


*AnToS*

[Drug_Store]

No, only
C/S/M35
C/S/Me45
SL4x

[bedjo]

-Bob is right, not work for me/s45
-this is not new solution,:)

@yanto

use, all 3/4 cracked, tesed 100%
or may be u can contact me..

[Drug_Store]

Well I didn´t test in any S or Me 45, but if someone wants to try, I also create for S and Me45.

About not being a new solution, you´re right, go see at my yahoo group, and you´ll see that´s been there since last year.

Even so, were´ve you been all this months that duzeons of users contacted me to solve their problem. If so easy and old solution why didn´t you help them all this past months.

Anyway, I doing it just to help some peolpe. Or I´m putting someone out of their job?

Help more, think less....

[bop_gsm]

@ hi all
this solution for All Siemens

Use All 3/4 Siemens Service v2.0.5 (cracked by Xak)
1. Load *.flx file
2. Select COM Port and mobile type
3. Check option "Write Flash"
4. Check option "Write IMEI"
5. Check option "Burst Mode ( 10% faster )

Now U are ready to flash the phone...
6. Press "Init Mobile" and follow the program instruction's

Afther flashing U need to read LOG file from phone and create a MAP file...

7. Use "Siemens IMEI Writer, Version 3.00" <-- read LOG and make MAP file
8. Now use " Siemens IMEI Writer, Version 3.00 " <-- to write MAP file to phone
Afther writing MAP file to phone, your phone is ready for calls...
Now is "All Done..."


Note: for all people who cant start SW, and if someone receive some strange messages like
( ...export to missing Kernel32.dll or COMCTL32.dll...) they need to reinstall windows 98 SE!!!
Only then, they will be able to run SW ( All 3/4 Siemens Service v2.0.5

Note: U must allways check both options "Write Flash" and "Write IMEI", only in that case U
will be update your phone with full (correct) flash and eeprom....

When U check option "Write IMEI" then SW will write eeprom to phone, only IMEI cant be upload
to phone, because the calcualting algorithm is inside the DONGLE!!!

bop_gsm@hotmail.com
Regards to all,

thx for Xak ;)

[Drug_Store]

Well, still need to map...
Sometimes, and as we all know, mapping, brings batt charging problems, graphics, etc... That´s why, I was trying to tell you all that doing it by *.lc it´s most reliable.

Anyway, do it as you want... but later don´t come bugging me to help you (not you bop_gsm, I mean all).

best regards

[bop_gsm]

@ Drug_Store

thx man

plz next time don't write 2 posting ;)

ok

take care :)

[Drug_Store]

Ok, sorry...

[sebagsm]

Use Ksie by Nutzo just enter the new imei and unlock... your eeprom is repaired....

[Drug_Store]

Ok, great suggestion...

Honestly, I never tried that. I´ll test it when I can.

PS: This will solve batt, display, etc problems?
Anyway I will test it.
Thanks

[-=SanSanyc=-]

:cool:

This trick very old and so stupid !!!

1. Use original All 3/4 2.1.0 for write full flash and eeprom zones.
support also M50 and MT50. Or cracked version 2.0.5 and clean windows. Another cracked version - still damaged eeprom.

2. Write worked MAP.

All done

:cool:

[Danchik]

Same as UniSiemens For Old phones Just write imei and Upload MAP ;)

[eriko]

Hi All...


I think write Imei can repair eeprom....

Imei always in eeprom for all handy OK?

Thanks
B.R

Eriko

[monti_908]

hey there every body ,
i m having siemens c 30 dead when trying to upload map on it , it is saying eeprom data damaged ,h ow to solve this problem .

thanks in advance ,
moni

[Diddl]

i hope you have read a fubu?

[sebagsm]

@monti_908

Hi! C30 is a little bit different than other Siemens phones bacause it is a Bosch. So you will need the soft C30 repair bin generator by Razvanel. In this soft you must enter your phones Imei number after that the soft will generate a bin file that you can flash into your phone. Thats all. I can send you the soft if you want!

[Drug_Store]

Originally posted by sebagsm
@monti_908

Hi! C30 is a little bit different than other Siemens phones bacause it is a Bosch. So you will need the soft C30 repair bin generator by Razvanel. In this soft you must enter your phones Imei number after that the soft will generate a bin file that you can flash into your phone. Thats all. I can send you the soft if you want!

Don´t start a "send me too" race... post link for download please.

[monti_908]

hi there seba i used the repair bin generator and uploded the flash with unisiemens but nothing happened.if u have any other idea u can help me .

thanks in advance,
moni

[sebagsm]

Hi!

Try with C30 Service Soft by PRO cracked by GUAR. Maybe ...:)

[sebagsm]

Another idea:

Try with Ksie by Nutzo
- Security
- Unlock/Change Imei
- enter your Imei number aftter that press the Change button

[Victor]

Solution works only Siemens brand phones (not ex BOSCH)

1. Tools
- siemens eeprom tool 2.15 by skylord
- maxim loger and mapcreator
- Any original Siemens map file for Initmap!

2. Solution:

- Make log
- Generate map

- Get IMEI Block 02 and wrote to following file into "Data" section:

{------------------- Simple XXX.MAP --------------}

[MapFileInfo]
Product = 78
Provider = 0x00
MapVer = 0x01
SWVersion = 28
Time = 140400
Date = 020719


[0076] ; Block numer is verry important
Offset = 0
Memory = 8
PStufe = 16
Service = 2
Version = 0
DataSize = 10

Data {
0x4B 0x50 0xDF 0x4B 0x0F 0xC9 0x73 0xB8 0xE0 0x46
}


[CheckSum]
Key = 159735

{--------------------------------------------------------------------------------}

- Start Siemens eeprom tool
- Load this map to phone (XXX.MAP)
- Don't power on phone
- Load map into phone and Enjoy...

Regards: Victor Levunliev

[Drug_Store]

Easier solution:

Write clean eeprom, and correct IMEI.

Eeproms:
http://www.drug-store.itgo.com/SiemensEEprom.htm

Correct IMEI with Ksie 5.1:
http://www.drug-store.itgo.com/SiemensPageLog.htm

And this issue it´s closed for me... Now each user, use what solution he wants. All solutions are here in this topic, so...

[AnToS]

@all

now everything okay :D good work thxxxx



bye


*AnToS*

[Diddl]

i have a M50 with eeprom damaged. can you help me ?


use M/MT50 unlocker. :)