I need Hyundai MB-115 real pinout.

[Raklm]

In shell pinout is wrong. (2x5 pins from pinfinder) but phone has 1x5pins miniusb connector (v3)
As alcatel s210/s211 not working.
Or perhaps pinout is on board near simholder. If these info are known please post here.

Thank you

[InfinitySupport]

Hello,

Please, try to swap Rx/Tx wires (S210 cable).
Also, pls, open phone and double check, are you sure that this phone has 1x5 but not 2x5 connector ?

[delchoni]

alll time success with infinity team thanks for the nice work !
COM3 selected
module v2.71
Device: Hyundai-MB-115
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A04:8A00]...
CPU: MT6223
chip: 0011:6F9A:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22102201:2AEA0000000000
flash: Amd AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.5B492 65D.[LCBJ23_07A_PMWY_PCB01_GPRS_MT6223P_S00.LK1FG01_6_3 _1_1T05M0821_M512G.BIN_4DD3DF8E].rpl
====================
New firmware detected (v.2.71, database date: unknown):
LCBJ23_07A_PMWY_PCB01_GPRS_MT6223P_S00.LK1FG01_6_3 _1_1T05M0821_M512G.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: support@infinity-box.biz
- send flash backup files to support: support@infinity-box.biz
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 5B49265D
identification#1 protocol ver: 04
ver. sw 1: LCBJ23_07A_PMWY_PCB01_GPRS_MT6223P_S00.LK1FG01_6_3 _1_1T05M0821_M512G.BIN
ver. sw 2: LK1FG01.6.3.1.1T05M0821_M512G, 71202CB2
ffs offset/size: 006D0000/00130000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: Hyundai-MB-115_LCBJ23_07A_PMWY_PCB01_GPRS_MT6223P_S00.LK1FG01 _6_3_1_1T05M0821_M512G__ffs...
file saved: C:\Documents and Settings\Administrator\Desktop\Hyundai-MB-115_LCBJ23_07A_PMWY_PCB01_GPRS_MT6223P_S00.LK1FG01 _6_3_1_1T05M0821_M512G__ffs_20090602-101513.B0E.bin
flash: 01227E22102201:2AEA0000000000
Backup required data Done
Patch required data ...
detection procedure, wait...
detection procedure completed
detection procedure, wait...
detection procedure completed
Patch required data Done
Special operation ...
Special operation Done
Write ...
flash: 01227E22102201:2AEA0000000000
Write: eeprom
Write Done
Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Hyundai-MB-115_LCBJ23_07A_PMWY_PCB01_GPRS_MT6223P_S00.LK1FG01 _6_3_1_1T05M0821_M512G__system_log_5B49265D_4DD3DF 8E_20090602-101627.B0X.bin
Finished, time used: 239 sec
Remove/Install battery now !