After successful flash X1u still dead

[amol_sm]

Hello,

I receive X1u in dead condition. When i receive this set i try to power on the set when only keypad light glow.....when i relese the power key light is off.
Then i ty to flash the set with TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318_898 _V0004.BIN

before i flash the set the original firmware is Micromax-X1u_TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318 _898_V0010__fullflash_part_1_of_1...

After that complete flash phone still same condition as before.:eek:

How to solve this problem Infinity Team :confused:


Here is the flashing Log....
COM6 [VCP0] selected
module v2.73
Device: Micromax-X1u
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:A31F:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318_898 _V0010.BIN
ver. sw 2: 932318_898_V0010, 00000000
ffs offset/size: 00600000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: Micromax-X1u_TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318 _898_V0010__ffs...
file saved: C:\Documents and Settings\Amol\Desktop\Micromax-X1u_TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318 _898_V0010__ffs_20090508-131720.B0E.bin
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Area: Firmware
flash: 98009600000000:2AEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 276 sec
Remove/Install battery now !

[rajesh_ch]

try to format ffs.if handset is still dead.& then flash with another version & post result.

wbr.
rajesh ch.

[amol_sm]

try to format ffs.if handset is still dead.& then flash with another version & post result.

wbr.
rajesh ch.
Did u read my first post...:D :D :D
I flash the set with new version & problem remain same :mad:

[InfinitySupport]

There is no any problems with flash process.
What to do:
1. it is need to try to flash phone with other firmware
2. check phone hardware !