Error when flash Benq-siemens EF51

[suntluk]

sir,please check it.
by BModule_v1.31 or BModule_v1.30.
--------------------------
COM3 [VCP0] selected
module v1.31
Device: BenQ EF51
Checking data, wait...
Action: flash write
"smart write" active
Write: Firmware
Skip: Flex
Write: Language Pack
Write: Eeprom
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
406250
Set Baud Done
Check Flash...
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 001C:00C8001C00C8
flash: Mitsubishi B 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: Firmware
Flash: 001C:00C8001C00C8
flash: Mitsubishi B 8Mb
error: answer#00
try#1 to recover erase error#00
error: answer#00
try#2 to recover erase error#00
error: answer#00
try#3 to recover erase error#00
error: answer#00
try#4 to recover erase error#00
error: answer#00
try#5 to recover erase error#00
error: answer#00
try#6 to recover erase error#00
error: answer#00
try#1 to recover write error at 00002000
error: answer#00
try#2 to recover write error at 00002000
error: answer#00
try#3 to recover write error at 00002000
error: answer#00
try#4 to recover write error at 00002000
error: answer#00
try#5 to recover write error at 00002000
error: answer#00
try#6 to recover write error at 00002000
Writing Fail
Finished, time used: 110 sec
Remove/Install battery now !
-------------------------

[suntluk]

None reply for this,please help me,sir.

[Faisal_Computer]

is battery charged ? do not disturb while flashing , and if battery fully charged then maybe its hardware problem , try to resold CPU and try again and post results
BR
Faisal_Computer

[suntluk]

Maybe software bug,sir.
I have checked the cable,battery and phone.not problem for these.
I try many many phone,but problem still.
please check the program,thanks.

[XHouser]

The same problem to me , i think is a bug, no hardware problem.;)