InfinityHelp Fly E310 Attitude

[yalcin_g]

Fly E310 Attitude

Phone Read NAND Flash and Langeditor edit Flash tr lang.
write phone! phone dead help me
plase help me

edit flash write and orj flash write phone not work

http://rapidshare.com/files/238063797/W4C29_07A_PCB03_GPRS_MT6229_S02.0267000219040000__ nand_fullflash_20090524-123411.B4M.rar.html



LOG:
Write NAND Flash :


==== log: [25.05.2009 09:23:53] ====
COM5 [VCP1] selected
module v2.82
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: write NAND flash
read mode: 01
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
source data: page only
id-page1 Ok
end mark #2 found
nfi area detection finished: Ok
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6229:8A02:8A02]...
CPU: MT6229
high speed boot On
chip: 0031:000F:0101
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
version: 3.02
cpu-id: 09
loader: 3.0840.00.00
NAND id: 98F19095
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
external ram: 00000000
finalize connection...
done
emi configuration...
ram size: 02000000
emi configuration done
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
NOR: 0000:000000000000 [00000000]
NAND: 0098:00F100900095 [08400000]
NOR chip is not installed
Initialize Done
Set baud ...
921600
Set baud Done
Identification ...
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
reading bootloader structure area (00080000 bytes)...
detecting bootloader structure...
source data: page only
id-page1 Ok
nfi area detection finished: Ok
detecting bootloader structure by source file...
source data: page only
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.82, database date: 08.05.2009):
W4C29_07A_PCB03_GPRS_MT6229_S02.0267000219040000.B IN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
Identification Done
Write ...
00006000 bytes sent
write core area 1 of 3...
00423400 bytes sent
write core area 2 of 3...
00E01C00 bytes sent
write core area 3 of 3...
006EA000 bytes sent
Write Done
Finished, time used: 740 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !



FORMAT :

==== log: [25.05.2009 10:35:35] ====
COM5 [VCP1] selected
module v2.82
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: NAND reset
read mode: 01
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6229:8A02:8A02]...
CPU: MT6229
high speed boot On
chip: 0031:000F:0101
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
version: 3.02
cpu-id: 09
loader: 3.0840.00.00
NAND id: 98F19095
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
external ram: 00000000
finalize connection...
done
emi configuration...
ram size: 02000000
emi configuration done
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
NOR: 0000:000000000000 [00000000]
NAND: 0098:00F100900095 [08400000]
NOR chip is not installed
Initialize Done
Set baud ...
921600
Set baud Done
Identification ...
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
reading bootloader structure area (00080000 bytes)...
detecting bootloader structure...
source data: page only
id-page1 Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.82, database date: 08.05.2009):
W4C29_07A_PCB03_GPRS_MT6229_S02.0267000219040000.B IN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
Identification Done
Write ...
formatting...
.................................................. .................................................. Write Done
Finished, time used: 55 sec
Remove/Install battery now !

[biochemistali]

if after restoring eeprom and full flash phone is not turning on then format in safe mode, make sure your battary is fully charged to give power

[yalcin_g]

ChineseMiracle v2.82 not write eeprom and flash + format power supply 4.0v phone not work

[yalcin_g]

InfinityHelp plase help

[InfinityHelp]

hello!

posted above link is for original flash file or edited?
what is pohne connector and pinout

[yalcin_g]

hello!

posted above link is for original flash file or edited?
what is pohne connector and pinout


upload flash orginal
pohne connector L10C
pinout 7: RX ----- 9: TX

[yalcin_g]

hello!

posted above link is for original flash file or edited?
what is pohne connector and pinout


I need help infinity

[yalcin_g]

InfinityHelp Please I need help too