A200 NKTEL Off On Press Sound Recorder Option

[irfanamin2]

Hi All,

I Have A200 NKTEL when I Press sound recorder option set go to black LCD then on In Set version is “N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB _S5LCD_V1_6_6.BIN” I am using latest version 2.82. I try to format I get this message:

New firmware detected (v.2.82, database date: unknown):
N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_6_6.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)

I can’t read this file because set is not work properly. I read flash file another phone and write flash on this phone with this version “[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_6CDGB_ S5LCD_V1_4_8.BIN]_20090409-184432.B0M”. Now sound recorder work perfect, but hand shack not working any solution or any one have working phone version “N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB _S5LCD_V1_6_6.BIN” so please share it.

Its urgent.

BR.

[irfanamin2]

Any answer ...............

[irfanamin2]

I flash A200 NKTEL this version "“N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB _ S5LCD_V1_6_5.BIN”" but phone not get power one I flash after this version "“N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB _ S5LCD_V1_6_6.BIN”" phone live but still same on off recorder when I flash this version “[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_6CDGB_ S5LCD_V1_4_8.BIN]_20090409-184432.B0M”. Phone hand shack not work (When I move phone right left phone screen chage not work) sound recorder work fine. any solution.

[InfinityHelp]

hello!

have you tried to solve this small problems by format FFS in a first place?
flashing is a last thing to do

[irfanamin2]

Mate! Here is format FFS logs I think its new phone software version therefore I get format FFS error Please see below logs

==== log opened: [10/6/2002 4:22:49 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: XXXXXXXX
Wait...
Device: Autodetect 6205-6227 NOR
Done

==== log: [10/6/2002 4:23:01 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8403:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27 28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 10 sec
Remove/Install battery now !

==== log: [10/6/2002 4:23:22 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8403:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27 28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 10 sec
Remove/Install battery now !

==== log: [10/6/2002 4:25:28 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8403:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22warning: wrong packet cs
23 24 25 26 27 28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !

==== log: [10/6/2002 4:25:55 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8403:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22warning: wrong packet cs
23 24 25 26 27 28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 53 sec
Remove/Install battery now !

==== log opened: [10/6/2002 4:29:25 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 723B:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done

==== log: [10/6/2002 4:30:16 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 1 sec
Remove/Install battery now !

==== log: [10/6/2002 4:30:29 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8403:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13warning: wrong packet cs
14 15 16 17 18 19 20 21 22 23warning: wrong packet cs
24 25 26 27 28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 11 sec
Remove/Install battery now !

==== log: [10/6/2002 4:30:53 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8403:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27warning: wrong packet cs
28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 14 sec
Remove/Install battery now !

==== log: [10/6/2002 4:31:17 AM] ====
COM13 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8403:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27warning: wrong packet cs
28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !

[irfanamin2]

Any solution or wait update software.

[InfinityHelp]

hello!

make format FFS in Complete mode.
you provided logs only for SAFE

[irfanamin2]

Mate! Here is FFS in Compltete mode logs.



==== log opened: [6/5/2009 9:02:23 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: xxxxxxxxxx
Wait...
Device: Autodetect 6205-6227 NOR
Done

==== log: [6/5/2009 9:02:39 PM] ====
COM7 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0A03:000C
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 61 sec
Remove/Install battery now !

==== log: [6/5/2009 9:03:50 PM] ====
COM7 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0A03:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27warning: wrong packet cs
28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 10 sec
Remove/Install battery now !

==== log: [6/5/2009 9:04:21 PM] ====
COM7 [VCP0] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0A03:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22warning: wrong packet cs
23 24 25 26 27 28 29error: detection failed (30 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 12 sec
Remove/Install battery now !

[irfanamin2]

Still waiting.................

[InfinityHelp]

hello!

all 3 logs above is "Safe" mode.
i am asking about complete

[irfanamin2]

Mate! Give littel info which option i check for Complete mode. I am using latest version 2.82. Thanks in advance.

[InfinityHelp]

hello!

next to format button you can choose "ffs: complete"

[irfanamin2]

Mate! Thanks for you supporting Here is "ffs: complete"


COM7 [VCP1] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:6703:000B
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.572CB3B7.[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_6_6.BIN_7444D22F].rpl
====================
New firmware detected (v.2.82, database date: unknown):
N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_6_6.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: mt62xx@gmail.com
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 572CB3B7
identification#1 protocol ver: 04
ver. sw 1: N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_6_6.BIN
ver. sw 2: N66_ABROAD_5CDGB_S5LCD_V1.6.6, D02DBB8B
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98000300000001:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_6_6__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\N66_ABROAD_PCB01_ GPRS_MT6225_S00.N66_ABROAD_5CDGB_S5LCD_V1_6_6__ffs _20090612-132744.B0E.bin
flash: 98000300000001:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\N 66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_S 5LCD_V1_6_6__system_log_572CB3B7_7444D22F_20090612-132946.B0X.bin
Finished, time used: 234 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

But Problem Still Same. I need this fimeware "N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_6_6.BIN" If you share it.Becuse I read other phone version "N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_6_5__fullflash_20090601-174013.B0M" write to phone phone is dead I flash again phone with this version 1.6.6 phone live but same problem. I hope you undersdand my problem.

[InfinityHelp]

hello!

unfortunately, we dont have exactly needed firmware.
please look arround for same phone, full backup taken from it can solve situation

[irfanamin2]

Mate! Thanks for you reply I m searching same firmware phone when I found I write full backup in my phone & send you to. If you found so please tell me asap. Again thanks for you support.

BR.