N95 cant read user code

[hassan tawrirti]

I TRY DIFFERENT unlock methodS NO LUCK

HERE (http://www.4shared.com/file/109195216/5468f07c/N95_PCB01_GPRS_MT6226_S01MAUI_06B_W07_04_MP_V32__f ullflash_20090601-162806B0M.html) IS FLASH FILE

COM30 [VCP0] selected
module v2.82
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C168:38FA
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.06B.W07.04.MP.V32
Version: N95_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35475900168706
connection Ok
detecting structure #1...
0 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31error: detection failed (29 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 117 sec
Remove/Install battery now !

[InfinityHelp]

hello!

make format FFS complete

[hassan tawrirti]

THANJS I DO & PHONE STILL ASK FOR CODE ITRY default user code: 1122, 3344, 1234, 5678
& NO SUCCESS

[InfinityHelp]

hello!

find on support flash file with version "N95_PCB01_GPRS_MT6226_S01MAUI_06B_W07_04_MP_V32"
and check if it is with eeprom "_w_eeprom"
write it to your phone, should defenatly remove any code