View Full Version : "no network" on hiphone f1. Please help !
Unlocker_001
06-03-2009, 13:10
I have 1hiphone f1 and no network. How i can resolve this problem? I format phone, flash but no succes. Any sugestions or other method. Thanks
InfinityHelp
06-03-2009, 23:55
hello!
restore valid IMEI number
Unlocker_001
06-04-2009, 16:31
hi. Imei number is valid.
InfinityHelp
06-05-2009, 00:01
hello!
remove smart card and try to call 112 (emergency call)
what result do you get?
Unlocker_001
06-05-2009, 14:46
I get "unable to connect"
InfinityHelp
06-06-2009, 00:15
hello!
very big chances that this phone has hardware failure or you trying to connect unsupported network type (f.e. 1900mhz)
Unlocker_001
06-08-2009, 09:57
my network is 900mhz
Helllo,
I have two phones with this problem. I cant detect NETWORK TOO.
How can I restore VALID IMEI NUMBER? How do you know which IMEI is VALID for this phone? I dont have paper with IMEI, this phone is not mine, but phone is in GOOD CONDITION..
Need I use FORMAT FLASH FFS? OR what??? Thanks, a lot
InfinityHelp
06-11-2009, 21:45
hello!
make format FFS complete.
valid IMEI value can be taken from any working mobile phone
read it from sticker and write to phone using IMEI writing option
and once again:
I dont understand, how can I write this IMEI with P
HONE SHOULD BE ON??
Must there BATTERY attached?? or how can I phone switch on???
InfinityHelp
06-16-2009, 23:18
hello!
do you use pinfinder or not?
Yes, sure, I am using INFINITY BOX and PIN FINDER ADAPTER. too
InfinityHelp
06-17-2009, 23:08
hello!
when you use pinfinder battery is not needed.
do following: activate silent mode in phone by pressing and holding "#" button.
remove battery, connect power crocodilles.
push "power" button in pinfinder software.
RED LED must start shining.
now power On phone and use method-1 for IMEi writing
Unlocker_001
06-18-2009, 09:41
"activate silent mode in phone by pressing and holding "#" button" WHY IS NEED THAT?
InfinityHelp
06-18-2009, 11:54
hello!
pinfinder use USB power for powering your phone.
some chinese phones take too much power when play loud startup tone.
this is why they can not be powered fully.
when you disable sounds- phone powers on from box power without any problem
InfinityHelp
06-18-2009, 11:54
hello!
pinfinder use USB power for powering your phone.
some chinese phones take too much power when play loud startup tone.
this is why they can not be powered fully.
when you disable sounds- phone powers on from box power without any problem