View Full Version : Need Unlocker 100% tested for Bosch 909 s
KillerFisch
12-12-2000, 11:38
Hi,
i tried the links in the topic before, but they don`t work. Please give me a link who works for tested soft!
Thanks
Dragonlock
12-12-2000, 13:28
Try the one by piotrs 1.2
it works 100% http://www.thoic.net/gsm/ubb/smile.gif
Tryed it for me selve ,unlocked 20 http://www.thoic.net/gsm/ubb/smile.gif
kind regards ,
choppo
------------------
hi, http://www.thoic.net/gsm/ubb/smile.gif
1000% working, test by me.
check your cable or pinout.
b.r.
LIKI999.
www.unlocking.cz/bosch (http://www.unlocking.cz/bosch)
Hi pls write pinouts for 909s
Thx Orbital GSM
Dragonlock
04-03-2001, 11:30
hi,
take a look at this :)
bosch (http://www.gsmhacking.com/cables/bosch/909.gif)
Dragonlock
PINOUT
1. from left, keyboard up is GND
second from right is C-bus
I use USPU 4.38 for unlocking
[ 03 April 2001 21:30: Message edited by: ARS ]
Originally posted by GSM-CZ TM&HM:
<STRONG>Hi pls write pinouts for 909s
Thx Orbital GSM</STRONG>
look at this...
http://flashes.kgb.cz/kabliky/bosch_909_s.gif
Thanx Dragonlock and Platy...
But my cable not working, i have UNI cable and i try conecct RX+Tx=CBus and GND, but not working, i dont know what now...
Thanx Orbital GSM
Originally posted by GSM-CZ TM&HM:
<STRONG>Thanx Dragonlock and Platy...
But my cable not working, i have UNI cable and i try conecct RX+Tx=CBus and GND, but not working, i dont know what now...
Thanx Orbital GSM</STRONG>
look at www.gsmhacking.com/cables (http://www.gsmhacking.com/cables)
Originally posted by GSM-CZ TM&HM:
<STRONG>Thanx Dragonlock and Platy...
But my cable not working, i have UNI cable and i try conecct RX+Tx=CBus and GND, but not working, i dont know what now...
Thanx Orbital GSM</STRONG>
No, no!
Rx+Tx is not C-bus!!!
You can use M-bus for C-bus. It works! ;)
Pandemonio100
04-13-2001, 17:55
Yes you have only a cable for data trasmission you can buy the cable C-bus from this site www.ucables.com. (http://www.ucables.com.) WORK100%
Regards ;)
hi all
how do u use the bosch 1.2 by piotrs!!
thanx
Dragonlock
04-16-2001, 15:10
Hi,,
Connect the cable to the computer
and C-bus to the phone
select Com 1 or 2
then read the codes :)
Regards,
Dragonlock
thanx dragonlock
but i get an error message "reading com" I am using f/m bus is that a wrong cable?
thnx
farry
I use cable with MAX232 and two transistors same as emulator sim card for Motorola phones it work 100%
Hi all
sorry 4 being ignorant what is a c bus and how du make one?
thanx
faryy
:rolleyes:
hey
C-bus hey
its like m bus its just called c bus.
If you have nokia m bus cable just connect the m bus and the gnd wire to correct pins on a bosch connector. AND VOILA you have the magnificent c bus.
Or just join rx+tx = c/m bus
regards
reo :D
<FONT COLOR="#ffff00" SIZE="1">[ 24 April 2001 22:49: Message edited by: reo ]</font>
sorry reo
could u explain a bit simpler as i am not familiar with technical side!!
thanx again man
regards
farry