Bosch 909 "Phone Failure" ?? how to repair [Archive]

reo

09-20-2001, 20:52

Hi

Does any1 no of this or have a solution for this. I have tried to upload another eepromm but it comes up with a blank screen.

regadsa reo

gsm4dcs

09-21-2001, 02:58

Check your mail!!!

ryumahon

09-21-2001, 03:39

hi there can i have the solution on how to repair hung up units for bosch 509 and phone failure units? many thanksssss!!!! <img src="biggrin.gif" border="0">

gsm4dcs

09-21-2001, 05:30

Use "Bosch Eprom reader-writer by SMD" and eeprom.bin from working Bosch509.

mail to: alexnet@operamail.com

mr_x4you

09-21-2001, 11:00

Please Shep, send me some dumps for Bosch 909S Thank's

gsm4dcs

09-21-2001, 13:25

Hi mr_x4you, Check your mail!!!

xmans

09-21-2001, 15:05

Hi. Please send me Bosch 90x eeprom dumps? Bye.

reo

09-21-2001, 23:30

Hello

Thanx a million to Shep, it work 100% now, but is there any way to change IMEI number on bosch ?

Thanx again

regards reo

markaba

09-22-2001, 06:33

Hi! I need working eep dump for Bosch908&909 Thanks to all Regards! markaba@netphonegsm.com <a href="http://www.netphonegsm.com" target="_blank">http://www.netphonegsm.com</a>

gsm4dcs

09-22-2001, 18:23

Hi markaba, check your mail!!!

markaba

09-23-2001, 08:59

Hi! Shep are u sure you' ve sent to the correct email addess.Please send me again markaba@netphonegsm.com markaba@ifrance.com

gsm4dcs

09-23-2001, 19:05

Hi markaba, check your mail!!!

jivkobg

09-23-2001, 23:21

Hei, Can somebody help me,I have Bosch 509 multiband with phone fault...I try to write eeprom with eeprom reader/writer by smd but last few bytes can't be writen. I need Help <img src="mad.gif" border="0"> <img src="mad.gif" border="0"> <img src="mad.gif" border="0">

markaba

09-24-2001, 00:39

Hi! thanks a lot Shep but can't fixed"phone failed" message cause no way to write eep.bin to phone always check cable From working phone I can play read/write without pb need help! Regards!

K-Dix

09-24-2001, 06:29

Hi shEp... may I have a working eeprom dump of 90x too?

DKN

09-26-2001, 10:55

HI SHEP, COULD YOU HELP WITH THE BOSCH 509 SOFTWARE FAILURE AND SOME JUST FREEZE UP, THIS WOULD BE APPRECIATED SEND TO dndelec@iafrica.com

DKN

09-26-2001, 10:57

HI SHEP, COULD YOU HELP WITH THE BOSCH 509 SOFTWARE FAILURE AND SOME JUST FREEZE UP, THIS WOULD BE APPRECIATED SEND TO dndelec@iafrica.com

Lynx

09-26-2001, 13:25

Please SheEp, send me too "Bosch Eprom reader-writer by SMD" Thanks regards Lynx

cat miao

09-26-2001, 13:52

Hi~~sheEp!PLS sent me<Bosch Eprom reader-writer by SMD>THX. bdboy1979@elong.com best regards

cab

09-27-2001, 02:45

Hi ShEp,

Can you send me the bosch eeprom reader and writer with the working eeprom dump. Thanks.

I'll rate you...

mslion7

10-06-2001, 18:12

Hi ShEp Can You send me Bosch eprom reader/writer with dump of Bosch 909s. Thanks and regarts mslion7@hotmail.com Milan

Crew

10-06-2001, 18:50

Hi, buddy 8-)

You can get it in my group: <a href="http://groups.yahoo.com/group/gsmhack-crew/files/Bosch/" target="_blank">http://groups.yahoo.com/group/gsmhack-crew/files/Bosch/</a>

WBR Crew

[QUOTE]Originally posted by mslion7: [QB]Hi ShEp Can You send me Bosch eprom reader/writer with dump of Bosch 909s.

Vasuk

10-09-2001, 18:06

After uploading Eprom to 909s i get a working phone with another IMEI and no network. How to make it see the net?

Crew

10-09-2001, 19:19

Sometimes is needed to upload more than one dump until you have working phone..

WBR Crew

[quote]Originally posted by Vasuk: After uploading Eprom to 909s i get a working phone with another IMEI and no network. How to make it see the net?<hr></blockquote>

Vasuk

10-10-2001, 14:52

I've already fixed it - loaded another dump.

Crew, can you email me 909S dumps you have?

What can I change IMEI in it with?

POISON

10-12-2001, 02:14

Hi! I need working eeprom dump for Bosch 909 Thanks to all Regards! cener@email.si

Moc

10-12-2001, 16:28

Hi ShEp Can You send me Bosch eprom reader/writer with dump of Bosch 909s.

E-Mail : c.radiovisor@teledata.mz

Rgds

Joseph79

10-14-2001, 09:14

Please Shep, send me some dumps for Bosch 909S Very Thank's My mail : josef.novy@post.sk

Joseph79 :

nightxyz

11-04-2001, 13:23

Hi,

I need Bosch 909 Dual Band Eeproms.I have 2 eeprom.

One of them is finding network but gives me "Recharge battery" repeatedly even full battery.

The other is working good but repeatedly searching network and doesn't find.

 Please send me some eeprom dumps for 909 Dual Band.My e-mail is mgxyz@yahoo.com

Best Regards...

------------------------------------------------ Nightxyz always shares his knowledge and helps all people... <img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">

goldman

11-10-2001, 23:25

hi I need bosch eeprom read write cable schema or link for it

jivkobg

11-12-2001, 22:47

Hi use M2bus cable for nokia phones. regards, UnlockMan <img src="biggrin.gif" border="0">

freddyfang

11-28-2001, 23:38

hi Mr ShEp

Have you still got the flash dump from your bosch 909s hopefully freddy

thanking you!!!!!

<img src="rolleyes.gif" border="0">

F C

11-29-2001, 09:36

hi shep,

kindly send me the dups too for 909....

regards <img src="wink.gif" border="0"> <img src="tongue.gif" border="0"> <img src="wink.gif" border="0">

freddyfang

12-08-2001, 02:11

Hi ShEp

Can you send me the dumps for a bosch 909s and if pos the program to upload to the phone Thanking you Freddyfang!!!!!!!!!!!!!!! <img src="tongue.gif" border="0">

pyroz

12-15-2001, 21:54

UnlockMan : try use hot air to your pcb (eeprom)

mslion7

12-17-2001, 00:48

Hi guys Can someone send me some 909 dumps , please? Thanks and regarts mslion7@hotmail.com Milan

Branx

01-01-2002, 22:46

Could you please SHeP e-mail me a solution for the "phone failure" Thanx in advance

F C

01-02-2002, 09:55

hi..

ujust need to ulpad the eprom dump thats it.. <img src="smile.gif" border="0">

regards gohar <img src="wink.gif" border="0"> <img src="wink.gif" border="0"> <img src="biggrin.gif" border="0">

cris

01-03-2002, 18:08

Hi all, I repair Bosch 509 with "Phone Failure".This is a software problem. The eeprom and flash informations are in the same part (AMD29SL800). Change it and phone will work fine. Or you can try to rewrite information in this flash part using Dejan`s method (use an 5110 layout to read/write information in flash). Best regards, Cris

Sandman

01-06-2002, 14:00

hi cris;

could you send me dump file for bosch 509? tell me also what soft did you use and instruction to repair it.......

waiting for your reply.............

thanks a lot and best regards............

 --------------------------------------

 kick butt first; take names later <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

Chryse

01-09-2002, 18:46

Hi Shep, can you please send me Bosch Eeprom dumps... I have a lot of Bosch Software Problem here... thanks in advance... my email: k_alabastro@skyinet.net

<img src="smile.gif" border="0">

Bigbrothers2000

01-09-2002, 23:05

i write the eeprom with software but always hanging on 31% from my bosch 909 and is still phone failure who can help me please best regards