View Full Version : Flashing problemz
Hi guys !
I met a problem during flashing my phone with modified *.bin; But problem is not the file, but - i don't really know what is going on.
When flashing (fullflash Bin = 6M). Once in 74%, other time in 34%, in different percentages, but always offsets were with many"0" = like this: 210000. When counter stops, phone display illuminated and the charger went on. So, the question is - does charger (non-original) influences on flashing phone ? Phone after "flashing" like this were without any difference from the state before. I've flashing in a docking station, but earlier there wasn't any problems. HELP, Guys !!! :-(
I had the same problem with my sl45i. I patched the fullflash (6MB) with the "animated operator logo v4 patch". When i wanted 2 flash this patched version (6MB) back into the phone, it stopped also at 34% and then the batterycharge comes up at my LCD screen.
If you want to patch your firmware with RizaPN patches you have to flash partially, not the whole flash.
If your firmware in flash is f*cked up (causes dead phone), use the original update file (SLIK5601w.EXE) to put your phone back in original state! (offcourse all your patches are gone then!)
If i patch my sl45i, i always make a backup of the HEX range witch i want to patch, if phone is dead or has strange side effects after flashing, i partially flash the backup and phone works again!
By the way, i also use standard docking station, and i can't answer your question "Why the full flash backup won't work on a docking station, or maybe by other flash cable".
Hmm... I'm afraid in doing partials :-) I didn't done it yet, so i tried with the fullflash. Maybe someone someday tell me steb-by-step how to flash my mob partially. WeaZul - how you done the flashing ?
I done what you said - killed my phone :-) Now i don't really know where to go for the slik56 flash *.exe (my bin with old flash also stops at 210000=34% [what the f**ck?] Before all was cool) I used Riza's flasher, unisiemens, SieFlash and damned others; When I even find flashable exe, i don't know how to put Riza's changes.. Buu
Drug_Store
03-20-2003, 10:25
Start by reading old posts...
Bring SL45 to life was a very posted problem. So I guess you won´t get any problems with that.
You can get the update file just here (http://home.conceptsfa.nl/~onderdyk/SLIK5601w.EXE)
And Drug_Store is right, you'll be a fool starting to flash your phone and at the same time not knowing what you are doing. So follow his advice; next time get better informed (for example reading some topic related posts on this forum) before you flash your phone!