s320 x patch 2.79 not work correctly

[ardagul]

COM4 [VCP0] selected
module v2.79
Device: Alcatel-S320X
Checking data, wait...
advanced flash detection enabled
Action: "repair imei"
new imei: 353618008808901
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:0E3E:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 05
ver. sw 1: JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36_SP 1_V20.BIN
ver. sw 2: MAUI.07A.W07.36.SP1.V20, 00000000
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: disabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
flash: 98004900000002:2AEA0000000000
Backup required data Done
Patch required data ...
................................................
................................................
................................................
.........................
original data found, method-B
Patch required data Done
Special operation ...
Special operation Done
Write ...
flash: 98004900000002:2AEA0000000000
flash: 98004900000002:2AEA0000000000
Write: imei
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
customization: CH16BM13
done
flash: 98004900000002:2AEA0000000000
flash: 98004900000002:2AEA0000000000
Write: security area (code #3, part #2)
security area (code #3, part #2) calculation done
security area (code #3, part #1) calculation...
use default security area (code #3, part #1) pattern
..................security area (code #3, part #1) detecting size...
security area (code #3, part #1) detecting parameters...
security area (code #3, part #1) encoding...
done
flash: 98004900000002:2AEA0000000000
flash: 98004900000002:2AEA0000000000
Write: security area (code #3, part #1)
security area (code #3, part #1) calculation done
Write Done
Finalization ...
formatting...
flash: 98004900000002:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-S320X_JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07 _36_SP1_V20__system_log__FFFFFFFF_20090630-122413.B0X.bin
Finished, time used: 363 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !



phone with restart after flash alcatel logo always;

pls check this I am ready to work on it.

[ardagul]

I try to reset setting and imei seen mistakes heres the log:

COM4 [VCP0] selected
module v2.79
Action: reset settings
Model: Alcatel-S320X
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:0E3E:A00C
status: 01
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: MAUI.07A.W07.36.SP1.V20
Version: JRD23_07A_HW
44 byte(s) read
imei: FF4E4B462391A0
connection Ok
building list...
done
items to clear: 148
warning: wrong packet cs
items cleared: 148 of 148
building list...
done
items remains: 0
Finished, time used: 23 sec
Remove/Install battery now !

[ardagul]

here



operation log: