Phones not detected by box

[lucky_gsm]

Hi;
Chinesse 6300 not detected by INFINITY BOX , But "read info" ok with spiderman cracked.
PINOUTS OK but still same

COM3 [VCP3] selected
module v2.84
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !

I already had this problem before with N95 2sim, and another chinesse 6300

What's a problem PLZ?

[InfinitySupport]

Hello,

Are you sure that you have used correct COM port ?

Also, if you have used other software be sure that you have closed other software before try to connect phone with Infinity-Box.

[moncef5]

hi;
chinesse 6300 not detected by infinity box , but "read info" ok with spiderman cracked.
Pinouts ok but still same

com3 [vcp3] selected
module v2.84
device: Autodetect 6205-6227 nor
checking data, wait...
Advanced flash detection enabled
action: Read/check detailed information
boot ...
Press and hold power button now !

I already had this problem before with n95 2sim, and another chinesse 6300

what's a problem plz? try to uninstal infinity driver reboot uou pc install it again it well work well

[lucky_gsm]

RX light illuminates when I hold the power buton but nothing happens in the software.
I tried unistall COM and reinstall it but same, HOW to unistall all driver plz?
at this moment i need flash file for spiderman french langage pending to solve this problem.
And I ask you if i can use infinitys flash files with spiderman?
Thanx

[lucky_gsm]

I found the file in infinitys support, but I don't know if i can use it with spiderman cracked or not, plz help very urgent

[sangmobile2010]

I found the file in infinitys support, but I don't know if i can use it with spiderman cracked or not, plz help very urgent


file in infinitys support not working with spiderman crack .

[lucky_gsm]

file in infinitys support not working with spiderman crack .
Thanx bro, can you help to find flash file from spiderman crack?

[LoveLess]

Thanx bro, can you help to find flash file from spiderman crack?

but at the moment u r in wrong section.. ;) ;)

check the China Phones Section or Spiderman Section.. add there to ur fw or search the flash file ur phone.. and let us to check for ur flash file...

b.r.

[lucky_gsm]

in the power supply, the boot does not maintain when i release power button, it return to 0.
any idea plz?

[lucky_gsm]

another Chinese phone that is not detected by the box, plz i want solve this problem very necessary. I killed one phone by spiderman crack,fortunately I've revived it to a friend by his infinity box , I don't want to repeat this experience.

I have this problem just with some chinese phones.
Question : Can UST PRO cause this problem when installed in same pc with infinity box and others box like Micro-box and Setool ? I have 5 box in 1 pc (Infinity, ufs, setool, ust pro, micro box)

[lucky_gsm]

Another 6300 rm-127 coming to me for flash, I tried but same problem, that's detect by spiderman crack, but not by Infinity box, plz Infinity team help, I'm sure that the problem is on software.

[lucky_gsm]

No answer???????????

[lucky_gsm]

Problem solved using UFS and infinity software

[InfinityHelp]

hello!

sorry, we did not reply because of weekend.
can you explane what was main problem and how did you solve it?

[lucky_gsm]

My infinity box, didn't detect any chinese phone which using PCB pinouts but work fine with others phones which connected by pinfinder, I tried with many phones but no success:
-I checked the voltage at pin1-8 is 5v
-I checked the pinouts with spiderman cracked, all was ok
-I installed infinity box alone in another pc.
-I tried with old version of chinese miracle module
-I used another cable...
but same problem
-After this i connected infinity box and ufs.
-I runned direct com for changing ufs to com port
-I selected com port (of ufs) in interface
and it worked perfectly

In your opinion what's the problem in my infinity box? knowing that working fine before

[LoveLess]

My infinity box, didn't detect any chinese phone which using PCB pinouts but work fine with others phones which connected by pinfinder, I tried with many phones but no success:
-I checked the voltage at pin1-8 is 5v
-I checked the pinouts with spiderman cracked, all was ok
-I installed infinity box alone in another pc.
-I tried with old version of chinese miracle module
-I used another cable...
but same problem
-After this i connected infinity box and ufs.
-I runned direct com for changing ufs to com port
-I selected com port (of ufs) in interface
and it worked perfectly

In your opinion what's the problem in my infinity box? knowing that working fine before

hi..


did u check f\bus - m\bus key..? fbus must be turn on..

[lucky_gsm]

All is ok, cable, Fbus , pinout, 5v... because is not my first time with infinity box, I flashed many phones with PCB pinouts.

[InfinityHelp]

hello!

this is really strange.
i think that you used wrong com port in infinity software.
pinfinder find comport automaticly, but if you dont use- then you have to select correct com port in chinese miracle module.
selecting wrong port could be a reason

[lucky_gsm]

hello!

this is really strange.
i think that you used wrong com port in infinity software.
pinfinder find comport automaticly, but if you dont use- then you have to select correct com port in chinese miracle module.
selecting wrong port could be a reason

If the com or pinouts are wrong the phone power on when i press power button, because the phone wich i tried to flash it working fine, i just wanted to change language.
for example when i wanted read "general information" the phone powered on correctly but nothing was happening on the software.
Is really strange problem.
For the moment I work with direct com (with PCB pinouts), it work fine.

[InfinityHelp]

hello!

best way i think is set pull_up resistors to box tx/rx
value of them you must find in tests.
start from 22kOhms, then go down 10kohms, 4,7kohms