lamloanmobile
07-08-2009, 05:54
Hi Infi TEAM
China 8800 dual SIM MT6225 new FW & Repair Bad Softwave not done
COM4 [VCP2] selected
module v2.84
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: repair "bad software" (mode-1)
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:D903:0004
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
slowest
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.84, database date: 28.06.09
):
SINGLE25_GEMINI_PCB01_GPRS_MT6225_S00.SG2580V1_1_T 9_62020_0313.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: SINGLE25_GEMINI_PCB01_GPRS_MT6225_S00.SG2580V1_1_T 9_62020_0313.BIN
ver. sw 2: sg2580v1.1_t9_62020_0313, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting firmware protection...
detecting firmware structure #8...
phase #1...
.................................................. ..............
phase #2...
..............................
done
detecting firmware structure #9...
detecting area #1...
.................................................. ..............
detecting area #2...
.................................................. ..............
done
error: firmware protection firmware structure #9 is not found or incorrect
What to do:
1. Be sure that your phone really has "bad software" problem, in other case do NOT use "bad software" button !
2. Repeat "bad software" operation several times to avoid communication problems.
3. Flash phone with firmware from support area and repeat "bad software" operation.
If still no luck:
1. read full flash and send to support: mt62xx@gmail.com
2. send "operation.log" file to support: mt62xx@gmail.com
error: autodetection failed
Finished, time used: 88 sec
Remove/Install battery now !
Full flash Load Here (http://www.4shared.com/file/116664630/953f2f6c/8800_2sim.html)
China 8800 dual SIM MT6225 new FW & Repair Bad Softwave not done
COM4 [VCP2] selected
module v2.84
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: repair "bad software" (mode-1)
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:D903:0004
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
slowest
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.84, database date: 28.06.09
):
SINGLE25_GEMINI_PCB01_GPRS_MT6225_S00.SG2580V1_1_T 9_62020_0313.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: SINGLE25_GEMINI_PCB01_GPRS_MT6225_S00.SG2580V1_1_T 9_62020_0313.BIN
ver. sw 2: sg2580v1.1_t9_62020_0313, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting firmware protection...
detecting firmware structure #8...
phase #1...
.................................................. ..............
phase #2...
..............................
done
detecting firmware structure #9...
detecting area #1...
.................................................. ..............
detecting area #2...
.................................................. ..............
done
error: firmware protection firmware structure #9 is not found or incorrect
What to do:
1. Be sure that your phone really has "bad software" problem, in other case do NOT use "bad software" button !
2. Repeat "bad software" operation several times to avoid communication problems.
3. Flash phone with firmware from support area and repeat "bad software" operation.
If still no luck:
1. read full flash and send to support: mt62xx@gmail.com
2. send "operation.log" file to support: mt62xx@gmail.com
error: autodetection failed
Finished, time used: 88 sec
Remove/Install battery now !
Full flash Load Here (http://www.4shared.com/file/116664630/953f2f6c/8800_2sim.html)