Safrane
04-02-2003, 13:13
Are you fed up with structions seller has given you for Emmi Clip?
Let me help! I detampered AND UNLOCK V50 .13.04 with this.
Use detamper instructions in general to unlock .13.xx models.
B.R.
Safrane
User Manual.
1.) Repair Tamper Alert
1.Switch on the clip (both LEDīs are on)
2.Push and hold red button
3.Switch on a phone (phone must have sim card inside)
4.Wait untill phone switch off, by himself
5.Release a button
6.Power on the phone again
7.You see one LED blinking
8. After LED stop blinking please insert 00000000
9. Wait until phone find network
10. Switch off the phone
11. Remove battery
2.) Unlock xx13xx and newer models
1. Switch on the clip (both LEDīs are on)
2. Connect phone to box (phone must be powered off)
3. Power on the phone
4. You see one LED blinking
5. After LED stop blinking please insert 00000000
6. Wait until phone find network
7. Switch off the phone
8. Remove battery
2.) Unlock old models
1.Clip must be switched off
2.Push and hold a button
3.Switch on a clip
4.Now green LED make a blink and goes OFF (only the RED LED is lighting now)
5.Connect phone (phone must be switched off)
6.Power on the phone
7.RED LED blink few times and phone is unlocked
Let me help! I detampered AND UNLOCK V50 .13.04 with this.
Use detamper instructions in general to unlock .13.xx models.
B.R.
Safrane
User Manual.
1.) Repair Tamper Alert
1.Switch on the clip (both LEDīs are on)
2.Push and hold red button
3.Switch on a phone (phone must have sim card inside)
4.Wait untill phone switch off, by himself
5.Release a button
6.Power on the phone again
7.You see one LED blinking
8. After LED stop blinking please insert 00000000
9. Wait until phone find network
10. Switch off the phone
11. Remove battery
2.) Unlock xx13xx and newer models
1. Switch on the clip (both LEDīs are on)
2. Connect phone to box (phone must be powered off)
3. Power on the phone
4. You see one LED blinking
5. After LED stop blinking please insert 00000000
6. Wait until phone find network
7. Switch off the phone
8. Remove battery
2.) Unlock old models
1.Clip must be switched off
2.Push and hold a button
3.Switch on a clip
4.Now green LED make a blink and goes OFF (only the RED LED is lighting now)
5.Connect phone (phone must be switched off)
6.Power on the phone
7.RED LED blink few times and phone is unlocked