Death sl45i,Pls help!

[EmbaTa]

I tried to calibrate the battery of my sl45i(FW56),
a friend sent me a sensor tool and a blk file!
I couldn't open the sensor tool,that's why I searched
for one through internet(by google)and find it(but I
think that it was the wrong one-supporting siemens
C35,cos the blk file going with it was called C35blk)
Anyway i used that sensor tool,but with the blk file
for sl45,which my friend sent me,and at the end when I
had to press "write phone",by mistake I pressed "write
file"Then I hooked out the data cabel,tried to switch
on the phone and only a light appeared to the display
and immediately disappeared,and this happens by every
next try:(
Then I tried to do the procedure in the right way,by
pressing at the end "write phone",but when I hooked
the phone to the data cabel and the pc read that it is
connected,an error sign appeared on the monitor
saying:
Error-Unable to read Eelite BlockId=67info
Then I flashed 56FW again but it didn't help!:(
What should I do,I need my phone fixed!I'm totally confused,pls explain me by every step?Pls help me???????

GreetZ
EmbaTa

:confused:

[Mishka]

First of all check battery voltage by multimeter - must be at least 3.7 V
Then start sensortool, wait until 4 or more blue squares appear at the bottom of sensortool window
Then put charged battery in phone, connect cable (must be chinese or without power supply from phone)
AND AT LAST SHORT PRESS ON POWER KEY
When your phone connect with program you will see SERVICE MODE on phone's display
In sensortools window you will see green word ACTIVE
then do everything with your phone

GOOD LUCK

[Drug_Store]

Originally posted by EmbaTa
I tried to calibrate the battery of my sl45i(FW56),
a friend sent me a sensor tool and a blk file!
I couldn't open the sensor tool,that's why I searched
for one through internet(by google)and find it(but I
think that it was the wrong one-supporting siemens
C35,cos the blk file going with it was called C35blk)
Anyway i used that sensor tool,but with the blk file
for sl45,which my friend sent me,and at the end when I
had to press "write phone",by mistake I pressed "write
file"Then I hooked out the data cabel,tried to switch
on the phone and only a light appeared to the display
and immediately disappeared,and this happens by every
next try:(
Then I tried to do the procedure in the right way,by
pressing at the end "write phone",but when I hooked
the phone to the data cabel and the pc read that it is
connected,an error sign appeared on the monitor
saying:
Error-Unable to read Eelite BlockId=67info
Then I flashed 56FW again but it didn't help!:(
What should I do,I need my phone fixed!I'm totally confused,pls explain me by every step?Pls help me???????

GreetZ
EmbaTa

:confused:

Read old post next time...

Write new eeprom and remap.

[EmbaTa]

Originally posted by Drug_Store
Read old post next time...

Write new eeprom and remap. Ok,thanx,but how do I write eeprom and remap,pls explain me by every step?
I need everything to be clear enough for me so I won't fail again:( Pls assist me???

[Drug_Store]

Originally posted by EmbaTa
Ok,thanx,but how do I write eeprom and remap,pls explain me by every step?
I need everything to be clear enough for me so I won't fail again:( Pls assist me???

Take on a clean eeprom or read it from another phone, write it with Unisiemens.

If you need clean eeprom, here get it on my site:
http://www.drug-store.itgo.com/SiemensEEprom.htm

Unisiemens can be found here:
http://www.drug-store.itgo.com/SiemensPageFls.htm

After writting eeprom, you´ll need to write IMEI.
Use Ksie 5.1.
Start it, enter on Security menu, click on Unlock / Change IMEI
Enter your IMEI, and press Change.

You also can get Ksie here:
http://www.drug-store.itgo.com/SiemensPageLog.htm

[EmbaTa]

Originally posted by Drug_Store
Take on a clean eeprom or read it from another phone, write it with Unisiemens.

If you need clean eeprom, here get it on my site:
http://www.drug-store.itgo.com/SiemensEEprom.htm

Unisiemens can be found here:
http://www.drug-store.itgo.com/SiemensPageFls.htm

After writting eeprom, you´ll need to write IMEI.
Use Ksie 5.1.
Start it, enter on Security menu, click on Unlock / Change IMEI
Enter your IMEI, and press Change.

You also can get Ksie here:
http://www.drug-store.itgo.com/SiemensPageLog.htm Do I need to use a sync station,or the data cabel will do the trick?I have only the data cabel!

GreetZ
EmbaTa

[EmbaTa]

One more question,pls!
Do I have to use Win 98 to do the procedure?
What if I use Win 2000?

[Drug_Store]

Originally posted by EmbaTa
Do I need to use a sync station,or the data cabel will do the trick?I have only the data cabel!

GreetZ
EmbaTa

You can do it with data cable.
I personally I use XP, but if other kind of programs, 98 will be the most appropriated.

[EmbaTa]

Something is wrong:when I pressed write eeprom,scanning appeared,I hooked the phone into the data cabel,waited long and nothing happened!
What should I do?

[Drug_Store]

Originally posted by EmbaTa
Something is wrong:when I pressed write eeprom,scanning appeared,I hooked the phone into the data cabel,waited long and nothing happened!
What should I do?

Connect phone to COM1, powered off.
Now press write eeprom
When say scanning press phone red button.

[EmbaTa]

Ok thanX I did it ,now I reached the step to write an IMEI,could You tell me one,or where to find it?Pls

[EmbaTa]

Sorry for the previous message,but I was wrong!I appologize!
When I pressed the red phone button(after scanning),a window appeared on the screen saying:INVALID FILENAME!
What should I do now,btw I don't know what IMEI to use if I ever reach the step for writing IMEI:(
Help me PLS?!?

RegardZ
EmbaTa

[Drug_Store]

Originally posted by EmbaTa
Sorry for the previous message,but I was wrong!I appologize!
When I pressed the red phone button(after scanning),a window appeared on the screen saying:INVALID FILENAME!
What should I do now,btw I don't know what IMEI to use if I ever reach the step for writing IMEI:(
Help me PLS?!?

RegardZ
EmbaTa

Open Unisiemens,
Press Load File, and select a full flash
Now press Write Flash
When say "Scanning", press power on

When done, use Ksie 5.1 to write IMEI
You can find IMEI number under battery

All can be found at my site...

[EmbaTa]

I haven't done this yet,I'll do it but need more info?
Sorry for wasteing Your time!
You wrote me-press load file,do I have to load the eeprom.bin file?Also after doing this,am I supposed to use usimload to write eeprom to my phone,before useing Ksie,or I could go straight to Ksie and write new IMEI?Pls help!

ThanX in advance,
RegardZ
EmbaTa

[Drug_Store]

Originally posted by EmbaTa
I haven't done this yet,I'll do it but need more info?
Sorry for wasteing Your time!
You wrote me-press load file,do I have to load the eeprom.bin file?Also after doing this,am I supposed to use usimload to write eeprom to my phone,before useing Ksie,or I could go straight to Ksie and write new IMEI?Pls help!

ThanX in advance,
RegardZ
EmbaTa

Now you got me confused.

Let´s try again...

Press load file, select eeprom.bin
press write eep

when done

Use Ksie 5.1
Get on Security menu, click on Unlock/Change IMEI
Write your IMEI in there
press Change

All done

If you need more help, just ask.

[EmbaTa]

Originally posted by Drug_Store
Now you got me confused.

Let´s try again...

Press load file, select eeprom.bin
press write eep

when done

Use Ksie 5.1
Get on Security menu, click on Unlock/Change IMEI
Write your IMEI in there
press Change

All done

If you need more help, just ask. Ok,let me explain You in details what am I doing:
1.I opened unisiemens-and small window appeared saying"privileged instructions"under it an 'ok' button,I pressed it and the window dissappeared.
2. Selected sl4x.
3.I pressed open file,selected bin file and opened it-nothing changed in the parameters>
4.then I pressed write eeprom-again window appeared saying
"ie_Badld_Specified comport doesn't exist":confused: :mad:
What should I do?
Can I get You on icq so You could guide me?

RegardZ

[EmbaTa]

Something more:I'm using unisiemens which I got from a friend,not Yours,cos when I downloaded it I couldn't extract it,don't know why,a window appeared(these deamned windows...)saying WinRAR diagnostic message:
1.Unknown method in unisimload.zip
2.No files to extract
Is there an error in downloading,what do You thing?
I want to use unisiemens from Your site(cos I think it's better,and will work fine),so help me in extracting it,or otherwise could You pls send it to my e-mail:eivanov2001@yahoo.com
I'm desperate:(

GreetZ

[Drug_Store]

Originally posted by EmbaTa
Ok,let me explain You in details what am I doing:
1.I opened unisiemens-and small window appeared saying"privileged instructions"under it an 'ok' button,I pressed it and the window dissappeared.
2. Selected sl4x.
3.I pressed open file,selected bin file and opened it-nothing changed in the parameters>
4.then I pressed write eeprom-again window appeared saying
"ie_Badld_Specified comport doesn't exist":confused: :mad:
What should I do?
Can I get You on icq so You could guide me?

RegardZ

Wich port do you use, isn´t it COM1?
Don´t start unisiemens.exe, start USIMLOAD.exe.

[Drug_Store]

Originally posted by EmbaTa
Something more:I'm using unisiemens which I got from a friend,not Yours,cos when I downloaded it I couldn't extract it,don't know why,a window appeared(these deamned windows...)saying WinRAR diagnostic message:
1.Unknown method in unisimload.zip
2.No files to extract
Is there an error in downloading,what do You thing?
I want to use unisiemens from Your site(cos I think it's better,and will work fine),so help me in extracting it,or otherwise could You pls send it to my e-mail:eivanov2001@yahoo.com
I'm desperate:(

GreetZ

Go to my site and donwload mine... Start USIMLOAD.exe...

[EmbaTa]

OK!
I downloaded the required version of WINRAR, so I could extract your unisiemens but it could not find the comport. I am using COM1.
Usimload would not launch untill I moved it in the same file with UNISIEMENS. Only then it worked.

Now my Siemens SL45 is ALIVE!!!

Thanks a lot!
Wish you all the best!

EmbaTa

[Drug_Store]

Originally posted by EmbaTa
OK!
I downloaded the required version of WINRAR, so I could extract your unisiemens but it could not find the comport. I am using COM1.
Usimload would not launch untill I moved it in the same file with UNISIEMENS. Only then it worked.

Now my Siemens SL45 is ALIVE!!!

Thanks a lot!
Wish you all the best!

EmbaTa

In middle of the prog says:
Flash
From
Size
EEprom
From
Size

and under this is:
Phone At:
COM1 or choose other

Yes you need to put USIMLOAD.exe into same directory.

You´re welcome...
Glad to see your phone working again...

[EmbaTa]

ThanX for everything my friend!
Now I need some more help:
Could You tell where to find the patch for enableing
other functions while playing mp3?
Could You send me a good tutorial for it cos it's not clear enough for me as I read the forum?
btw what else could You recommend me for emproving my phone,like other patches etc. which does not have any bugs?

Play volleyball
/the receipt/

RegardZ
EmbaTa

[Drug_Store]

Originally posted by EmbaTa
ThanX for everything my friend!
Now I need some more help:
Could You tell where to find the patch for enableing
other functions while playing mp3?
Could You send me a good tutorial for it cos it's not clear enough for me as I read the forum?
btw what else could You recommend me for emproving my phone,like other patches etc. which does not have any bugs?

Play volleyball
/the receipt/

RegardZ
EmbaTa

You can search patches on RizaPn post easily...

I don´t have any tutorial to help you... Sorry

[EmbaTa]

ok,
one more thing:
I need to improve my battery parameters,
need at least 4days stand-by,
could You tell me where to find the sensortool program,
and how to use it,what do I have to do?
Give me a nice tutorial,pls!
Sorry for wasting Your time again,
I appreciate Your help!:)

play volleyball
/the receipt/

GreetZ
EmbaTa

[EmbaTa]

Sorry,
I just found the sensortools and the blk files in Your site,so only only I need You to explain me how to use them,what do I have to do/desperately need Your tutorial/I don't want my phone damaged again!;)
btw:which sensortool to use (1.1 ; 1.2 or 1.3)?

Play volleyball
/the receipt/

GreetZ
EmbaTa

[zalaros]

Yes it would be very usefull if someone told some things on how to use siemens sensor tools because some of us still don't know and this is not bad.We are all still learning... :) ThanX

[Drug_Store]

Probably you wanna know what does mean the field 0000 if you put 6000 or 7000 what will happend, right?

Well in this few people can understand what does mean each field on siemens sensors tools.

Start it, and while you´re starting, press power button periodicly, (I mean press on in each 2 or 3 seconds) to enter on Service Mode.

The most easy way is to do this on a 100% working phone, and read his values. Save them, and write it into your phone.

[EmbaTa]

Originally posted by Drug_Store
Probably you wanna know what does mean the field 0000 if you put 6000 or 7000 what will happend, right?

Well in this few people can understand what does mean each field on siemens sensors tools.

Start it, and while you´re starting, press power button periodicly, (I mean press on in each 2 or 3 seconds) to enter on Service Mode.

The most easy way is to do this on a 100% working phone, and read his values. Save them, and write it into your phone. I'm a lil confused,so could You explain me by details?
I'll open the sensortool 1.3?
What about the blk files from Your site(aren't they the values from 100% working phone,You're talking about?)Do I have to use it and write it into my phone?:confused:
What is the exact procedure?

Play volleyball
/the receipt/

GreetZ

[Drug_Store]

Originally posted by EmbaTa
I'm a lil confused,so could You explain me by details?
I'll open the sensortool 1.3?
What about the blk files from Your site(aren't they the values from 100% working phone,You're talking about?)Do I have to use it and write it into my phone?:confused:
What is the exact procedure?

Play volleyball
/the receipt/

GreetZ

You can use any of the 3 siemens sensors tools

Yes open.

Yes, they were read from 100% working phones
Yes write it to phone

Run Sensor Tools
press power on until enters in "Service Mode"
Press Read phone, save values (to backup your phone values)
Now press read file
select *. blk
press write phone

press exit
Turn off the phone

All done

[EmbaTa]

Originally posted by Drug_Store
You can use any of the 3 siemens sensors tools

Yes open.

Yes, they were read from 100% working phones
Yes write it to phone

Run Sensor Tools
press power on until enters in "Service Mode"
Press Read phone, save values (to backup your phone values)
Now press read file
select *. blk
press write phone

press exit
Turn off the phone

All done Hi again,
all done:I wrote Your "mysl45.blk" to my phone,but:
before doing all these procedures I was having strange
battery indicator(after charging fully my battery,on full indicator it lasted 2 days,and the other 3 bars of the indicator were lasting only for a day,than the message 'battery empty,pls recharge'appeared and in some minutes the phone went switched off!:(
I thought that after writing new eeprom and Your blk file,
everything will be fine,but unfortunately not,it's the same!:(
What do You think:have I done a mistake while writing the eeprom and the blk file,
aren't they good enough,
do I have to try with another blk,
is it a problem from my battery,etc?
Could You give me a good solution to this problem,
I need a logical battery indicator,pls?

Play volleyball
/the receipt/

Best wishes
EmbaTa

[zalaros]

The same thing has happened to me too.That's why i asked some details about the values in sensor tools.I've tried many .blk files for SL45 but nothing was fixed.I'm not concerned about the endurance of the battery, i'm concerned about the wrong indicator.I've also loaded new eeproms (beside the .blk files)and now i don't know what else to try.I want to experiment more just to make the battery indicator work logical:)

[Drug_Store]

Try some other *.blk, or read from another phone.

[usong725]

hi...got my sl45 dead also...i want to load the eeprom.bin using Unisiemens but don't know what should i use for the EEPROM from & size. the default values when sl45 is selected are 5F0000 and 010000. pls advise if these are the correct values....would appreciate ur help..

[zalaros]

You don't have to change anything in from & size. You just press "read file" and then press "write eeprom". That's all :) Good luck...

[usong725]

tnx zalaros....but i still got the wrong software sometimes...what i did was
1. load the eeprom.bin using Unisiemens...did not change the from & size of EEPROM...
2. tried to use ksie 5.1 to change the IMEI...
3. removed/inserted the battery
4. turn of the fon...got wrong software so removed/inserted the battery/sim/MMC again..
5. sl45 is alive again but some of the characters are distorted and if turned off and on....wrong software occur again...what should i do? :(

[zalaros]

Load a new clean eeprom from drug store's site (http://www.drug-store.itgo.com/SiemensPage.htm) and everything will be ok again.

[usong725]

tnx zalaros...my sl45i is ok again...what i did was to write new eeprom, write IMEI, flash fw54, flash fw56....i've done this more than 5 times :( but it's ok coz my fon is working again....:D