How to repair phone CID49 Conveted to CID51/52

[mimounts]

Any solution for Sonyericsson Z530i cid49, dead after converted to cid52. i cant find flash file ou Bypass for this phone after covertion (cid52) in support.:(:(:(:rolleyes:

[jakoy]

DB2012 not work cid49 to cid51/52
only DB2020 works.

[mimounts]

I accidentally converted with this file C:/SE-Tool/script/070323_DB2012_CROD_CID_51_to_CID_52_Red.gdfs by SETool

now see log in (SETool) :


v0.915038/UNI
CARD SERIAL: 000XXXXX
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
PRELOADER SECURITY BYPASS ENABLED
CFG:101111111100000
ChipID:8040,EMP protocol:0301
erom_readvar: error reading unit 1/725
error while reading SIMLOCK SIGNATURE unit
phone was tampered with other software
SECURITY UNITS CAN'T BE READ !

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:115200
Flash ID check:897E
Flash props sent ok
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35928400234899 CERT:RED
FLASH CID:52 COLOR:RED

Model (from GDFS):Z530i
Brand:Generic
MAPP CXC article: R6GA004 prgCXC1250454_GENERIC_MU
MAPP CXC version: R6GA004
Language Package: AMERICA_2
CDA article: CDA102462/8
CDA version: R2A
Default article: cxc1250290
Default version: R4GC010
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R6GA004_CXC1250454_GENERIC_MU"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

SECURITY UNITS BACKUP CREATED.
Elapsed: 16 secs.


Help

[mimounts]

this z530i was coded as 5,

network lockd
network subset lockd
SCS Lockd
societe lockd
ESL Lockd

setools cant unlock this type of blocking,

so I decided to unlock with dream box with test point,

I test, dream box does not support DB2012 CID49 Phone, Just supports CID51 or 52 DB2012.

I thought to convert to CID51 or 52.

for this I use the setools. and I "WRITE SCRIPT" with this file "070323_DB2012_CROD_CID_51_to_CID_52_Red.gdfs" and the phone is converted to CID52,

without the test phone after conversion,

I use dream box and I unlocked the phone with Test Point "ALL LOCK Open ",

and when I tried to turn it on, it Power up for 10s without any screen just light. then it turns off then turns back on itself.



PLS help me.

[kanaci2]

Try to convert to CID 52 or 53 again...read all informatin before do it ...good luck .WBR

[sairat]

i accidentally converted with this file c:/se-tool/script/070323_db2012_crod_cid_51_to_cid_52_red.gdfs by setool

now see log in (setool) :





help



this z530i was coded as 5,

network lockd
network subset lockd
scs lockd
societe lockd
esl lockd

setools cant unlock this type of blocking,

so i decided to unlock with dream box with test point,

i test, dream box does not support db2012 cid49 phone, just supports cid51 or 52 db2012.

i thought to convert to cid51 or 52.

For this i use the setools. And i "write script" with this file "070323_db2012_crod_cid_51_to_cid_52_red.gdfs" and the phone is converted to cid52,

without the test phone after conversion,

i use dream box and i unlocked the phone with test point "all lock open ",

and when i tried to turn it on, it power up for 10s without any screen just light. Then it turns off then turns back on itself.



pls help me.



mate i hope setool can solve it better to post in setoOl forum there you can get better help WITH YOU YOU INFECT YOUR PHONE (mobile-files) its dream section